• Top-of-the-line digital caliper. Solar type caliper with no battery and IP67 protection assures waterproof reliability.

• With no annoying origin restoration necessary, a measurement can be started any time and there is no restriction on operating speed.
• The impact resistance of the display unit has been increased for improved usability in workshop conditions.
• Waterproof function makes this Super Caliper suitable for use in an environment containing large amounts of cutting fluid or coolant. Operability is equivalent to the mechanical type caliper.
• This SuperCaliper uses components that do not contain harmful substances and is  compatible with RoHS Directives.
• Slider operation is smooth and comfortable.

SPECIFICATIONS

Metric

Order No.	Range	Remarks	Mass
500-776	0 – 150mm	with data output	180g
500-777	0 – 200mm		210g
500-774	0 – 150mm	w/o data output	180g
500-775	0 – 200mm		210g

Inch/metric

Order No.	Range	Remarks	Mass
500-786	0 – 6″	with data output	180g
500-787	0 – 8″		210g
500-784	0 – 6″	w/o data output	180g
500-785	0 – 8″		210g

DIMENSIONS

Range	A	B	C	D	H	L
0 – 150mm/0 – 6″	16.5	21	13	40	16	233
0 – 200mm/0 – 8″	20	24.5	16.5	50	16	290

Jaw thickness: 3.5mm

Optional accessories

(Dedicated for the models equipped with a digimatic output function (Code No. 500-776, 500-777, 500-786 and 500-787)) For details, refer to page D-39.

• Connecting cables for IT/DP/MUX* 05CZA624: SPC cable with data button (1m) 05CZA625: SPC cable with data button (2m)

• USB Input Tool Direct
  06ADV380A: SPC cable for USB-ITN-A (2m)

• Connecting cables for U-WAVE-T
  02AZD790A: SPC cable for U-WAVE with data button (160mm)
  02AZE140A: SPC cable for foot switch

* Cannot be used for other than water resistant type Digital calipers with external output function.

About the charge function (SuperCaliper)

The minimum illumination required in the uncharged state is 60lux.
As shown in the table ‘JIS Z 9110 Artificial Illumination Intensity Standard’, this SuperCaliper can be used with confidence in a normal work environment.

The charge function allows the operator to use the SuperCaliper without interrupting work even if the ambient illumination is temporarily insufficient.

• In the fully charged state this SuperCaliper can operate for approximately one hour in an environment of 50lux illumination (less than the minimum necessary illumination intensity).
• The time necessary for full charge varies according to the charging If the SuperCaliper is left unused in an illumination of 500 lux (usual for manufacturing environments), it takes approximately one hour to reach full charge.

IP67 protection level
Level 6: Dust-proof.
No ingress of dust allowed.
Level 7: Protected against water penetration.
Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed to a depth of 1 meter in water under standardized conditions of pressure and time (30 min.).

Demonstration device

Technical Data
Resolution: 0.01mm or .0005″/0.01mm Accuracy: ±0.02mm (excluding quantizing error) Repeatability: 0.01mm
Quantizing error: ±1 count Dust/Water protection level: IP67* Power supply: Solar cell**
Display: LCD
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
* This model is not waterproof type. Therefore, rustproofing shall be applied after use.
** Can be used continuously above 60lux ambient illumination.

Functions

Origin-set: Absolute origin position can be changed.
Alarm: Error message is displayed and measurement

functions become inoperative if:

• Tool is turned on when both illumination and charging voltage are insufficient.
• Main unit is extremely polluted and miscalculation occurs in the display unit.

Air leak test equipment for water resistance inspection
Generally, an air leak test is adopted for evaluating water resistance.

Procedure: Place the measuring tool inside the capsule and seal it. Then fill the capsule and the test chamber with air at the required pressure and close the isolating valves. If there is no leak in the measuring tool, the differential pressure sensor will read zero, because the amount of air inside the test chamber is unchanging. However, if there is a leak in the measuring tool, the differential pressure sensor will show a non-zero reading due to a decrease in pressure inside the test chamber as air leaks into the tool. By detecting this differential pressure, GO/NG judgment for the severity of the leak is performed. This air leak test is performed for all ABS coolant proof calipers and coolant proof micrometers.

Air leak test equipment for ABS coolant proof caliper

• These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement.
• Up to four extension rods (250mm or 500mm) can be used for measuring at the bottom of a hole 2m deep.
• ABS (ABSOLUTE) type bore gages are not subject to overspeed error.
• The display and grip can be rotated up to 320 degrees and the display can be inclined up to 90 degrees, so that it is easily readable from any direction.
• The minimum value holding function provides easy measurement of hole diameter.
• Setting the Bore Gage to a master value using a gauge block set allows quick and accurate setting.
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Resolution	Content of set			Probing depth
						Anvil	Interchangeable washer	Battery (SR44)
511-501	45-100mm	1.2mm	5N or less	10N or less	0.001mm	12 pcs.	4 pcs.	2 pcs.	150mm
511-502	100-160mm					13 pcs.	4 pcs.	2 pcs.

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Resolution	Content of set			Probing depth
						Anvil	Interchangeable washer	Battery (SR44)
511-521	1.8-4.0″	.047″	5N or less	6N or less	.00005″/ 0.001mm	12 pcs.	4 pcs.	2 pcs.	6″
511-522	4.0-6.5″					13 pcs.	4 pcs.	2 pcs.

Notes: 1) Normal use is assumed to be 8 hours per day.
2) The correct peak value may not be displayed if the anvil’s speed exceeds 50 μm/s.
3) IP53 indicates resistance to dust and dripping water, but only applies when the connector cap is in place.

DIMENSIONS

STANDARD ACCESSORIES

Bore gage	Anvil					Interchangeable washer
(Main body)	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t
511-501 511-521	1	21DZA232A	45mm/1.8″	15mm/.59″	5.5mm/.22″	205457 205458 205459 205460	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″
	2	21DZA232B	50mm/2.0″	20mm/.79″	10.5mm/.42″
	3	21DZA232C	55mm/2.2″	25mm/.98″	15.5mm/.61″
	4	21DZA232D	60mm/2.4″	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	65mm/2.6″	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	70mm/2.8″	40mm/1.57″	30.5mm/1.20″
	7	21DZA232G	75mm/3.0″	45mm/1.77″	35.5mm/1.40″
	8	21DZA232H	80mm/3.2″	50mm/1.97″	40.5mm/1.59″
	9	21DZA232J	85mm/3.4″	55mm/2.17″	45.5mm/1.79″
	10	21DZA232L	90mm/3.6″	60mm/2.36″	50.5mm/1.99″
	11	21DZA232M	95mm/3.8″	65mm/2.56″	55.5mm/2.19″
	12	21DZA232N	100mm/4.0″	70mm/2.76″	60.5mm/2.38″
511-502 511-522	1	21DZA232A	100mm/4.0″	15mm/.59″	5.5mm/.22″	205457 205458 205459 205460	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″
	2	21DZA232B	105mm/4.2″	20mm/.79″	10.5mm/.42″
	3	21DZA232C	110mm/4.4″	25mm/.98″	15.5mm/.61″
	4	21DZA232D	115mm/4.6″	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	120mm/4.8″	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	125mm/5.0″	40mm/1.57″	30.5mm/1.20″
	7	21DZA232G	130mm/5.2″	45mm/1.77″	35.5mm/1.40″
	8	21DZA232H	135mm/5.4″	50mm/1.97″	40.5mm/1.59″
	9	21DZA232J	140mm/5.6″	55mm/2.17″	45.5mm/1.79″
	10	21DZA232L	145mm/5.8″	60mm/2.36″	50.5mm/1.99″
	11	21DZA232M	150mm/6.0″	65mm/2.56″	55.5mm/2.19″
	12	21DZA232N	155mm/6.2″	70mm/2.76″	60.5mm/2.38″
	13	21DZA232P	160mm/6.4″	75mm/2.95″	65.5mm/2.58″

Technical Data
Accuracy: Metric models 3µm
Inch models .00012″
Excluding quantizing  error
Repeatability: Metric models 2µm
Inch models .00008″
Adjacent error: Metric models 2µm
Inch models .00008″
Battery: SR44 (2 pc), 938882,  for initial operational checks  (standard accessory)
Battery life: Approx. 2000 hours under normal use.
Display: LCD character hight 8.5mm
Scale type:   ABSOLUTE electrostatic linear encoder
Max. response speed: Unlimited

Function
Preset function
Master value registration (3 values at maximum)
Tolerance judgment
Upper/lower limit registration (3 values at maximum)
Minimum value holding
Data output
Display rotation (320°)
Display inclination (90°, 7 steps)
Low battery alarm display
Error display

Optional Accessories
21DZA089:  Extension rod 250 mm (10″)
21DZA081:  Extension rod 500 mm (20″)
Up to four extension rods can be jointed, and the
maximum length 2m is allowed.
Refer to page A-21 for details
Connecting  cables for Input Tool/ Digimatic Mini-Processor, etc.
1m: 905338
2m: 905409

USB Input Tool Direct (2m): 06ADV380F
Connecting cables for U-WAVE-T
For standard  (160mm): 02AZD790F
For foot switch: 02AZE140F
— : Setting ring (See page C-47.)
Digimatic Mini-Processor DP-1VR: 264-504

Example of connection
When connecting four pieces of 500mm extension rods

Gauge blocks and block sets for setting the origin or master value (optional)

Rectangular gauge blocks
* Available only for 511-501/521
516-118-10
516-118-60 with calibration certificate

Description		Order No.	Qty
Nominal length (mm)	1	611611-021	1
	2	611612-021	1
	3	611613-021	1
	5	611615-021	1
	10	611671-021	1
	20	611672-021	1
	30	611673-021	1
	40	611674-021	1
Flat jaw		630030	1 pair (2 pcs)
Holder 160 mm		619004	1
Certificate of inspection		1

* Equivalent to JIS B 7506 Grade 0

Square gauge blocks
* Available only for 511-501/521
516-119-10
516-119-60 with calibration certificate

Description		Order No.	Qty
Nominal length (mm)	1	614611-021	1
	2	614612-021	1
	3	614613-021	1
	5	614615-021	1
	10	614671-021	1
	20	614672-021	1
	30	614673-021	1
	40	614674-021	1
Flat jaw		619072	1 pair (2 pcs)
Tie rod 3”		619062	1
Tie rod 2 1/4”		619063	1
Tie rod 1 1/2”		619064	1
Flat head screw 1 1/4”		619057	2
Flat head screw 5/8”		619058	2
Certificate of inspection		1

* Equivalent to JIS B 7506 Grade 0

• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• Carbide contact point ensuring high durability and wear resistance.
• Grip is large and hollow to reduce effect of body heat on high-accuracy measurements.
• Alternative indicators may be used in place of those recommended*.
  * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
• Optional extension rods can be attached for measuring deep holes. (For details, refer to page C-45.)
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Washer
511-415	15-35mm	1.2mm	4N or less	6N or less	511-415	Not supplied	Not supplied	11 pcs.	1 pc.	150mm
511-416	35-60mm				511-416			6 pcs.	4 pcs.
511-417	50-150mm		5N or less	10N or less	511-417			11 pcs.
511-425	15-35mm	1.2mm	4N or less	6N or less	511-415	204658 (Graduation: 0.01mm)	21DZA000	11 pcs.	1 pc.	150mm
511-426	35-60mm				511-416			6 pcs.	4 pcs.
511-427	50-150mm		5N or less	10N or less	511-417			11 pcs.
511-435	15-35mm	1.2mm	4N or less	6N or less	511-415	210958-10 (Graduation: 0.001mm)	21DZA000	11 pcs.	1 pc.	150mm
511-436	35-60mm				511-416			6 pcs.	4 pcs.
511-437	50-150mm		5N or less	10N or less	511-417			11 pcs.

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Washer
511-418	.6-1.4″	.047″	4N or less	6N or less	511-418	Not supplied	Not supplied	11 pcs.	1 pc.	6″
511-419	1.4-2.4″				511-419			6 pcs.	4 pcs.
511-420	2.0-6.0″		5N or less	10N or less	511-420			11 pcs.
511-428	.6-1.4″	.047″	4N or less	6N or less	511-418	292258 (Graduation: .0005″)	21DZA000	11 pcs.	1 pc.	6″
511-429	1.4-2.4″				511-419			6 pcs.	4 pcs.
511-430	2.0-6.0″		5N or less	10N or less	511-420			11 pcs.
511-438	.6-1.4″	.047″	4N or less	6N or less	511-418	292358-10 (Graduation: .0001″)	21DZA000	11 pcs.	1 pc.	6″
511-439	1.4-2.4″				511-419			6 pcs.	4 pcs.
511-440	2.0-6.0″		5N or less	10N or less	511-420			11 pcs.

Notes:

1) A 10mm  (.4″) sub-anvil is supplied with 511-415/425/435/418/428/438 and a 50mm (2″) sub-anvil is supplied with 511-417/427/437/420/430/440.
2) It is not permissible to use a sub-anvil other  than  as supplied as a standard  accessory, or widen a measuring  range  by using multiple sub-anvils. (The measurement  accuracy in such cases is not guaranteed.)

Contact Points

DIMENSIONS

Notes: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil							Interchangeable washer		Sub-Anvil
	Marked No.	Order No.	Indication of measuring size	L1	L22	R4	L14	Order No.	t	Order No.	L23	L19
511-415 511-418 (  ) Used 10mm/.4″ Sub-Anvil	1	21DZA376A	15mm(25mm)/.59″(.98″)	4.5mm/.18″	2.5 mm/ .1″	SR1 mm/SR.04″	2mm/.08″	212127	0.5mm/.02″	21DAA563	2.5mm/.1″	10mm/.4″
	2	21DZA376B	16mm(26mm)/.63″(1.02″)	5.5mm/.22″			3mm/.12″
	3	21DZA376C	17mm(27mm)/.67″(1.06″)	6.5mm/.26″			4mm/.16″
	4	21DZA376D	18mm(28mm)/.71″(1.10″)	7.5mm/.30″			5mm/.20″
	5	21DZA376E	19mm(29mm)/.75″(1.14″)	8.5mm/.33″			6mm/.24″
	6	21DZA376F	20mm(30mm)/.79″(1.18″)	9.5mm/.37″		SR1.5 mm/SR.06″	7mm/.28″
	7	21DZA376G	21mm(31mm)/.83″(1.22″)	10.5mm/.41″			8mm/.31″
	8	21DZA376H	22mm(32mm)/.87″(1.26″)	11.5mm/.45″			9mm/.35″
	9	21DZA376J	23mm(33mm)/.91″(1.30″)	12.5mm/.49″			10mm/.39″
	10	21DZA376L	24mm(34mm)/.94″(1.34″)	13.5mm/.53″			11mm/.43″
	11	21DZA376M	25mm(35mm)/.98″(1.38″)	14.5mm/.57″			12mm/.47″
511-416 511-419	1	21DZA404A	35mm/1.38″	17.5mm/.69″	7.5 mm/ .3″	SR1.5 mm/SR.06″	10mm/.39″	212127 212128 212129 212130	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″
	2	21DZA404B	40mm/1.57″	22.5mm/.89″			15mm/.59″
	3	21DZA404C	45mm/1.77″	27.5mm/1.08″			20mm/.79″
	4	21DZA404D	50mm/1.97″	32.5mm/1.28″			25mm/.98″
	5	21DZA404E	55mm/2.17″	37.5mm/1.48″			30mm/1.18″
	6	21DZA404F	60mm/2.36″	42.5mm/1.67″			35mm/1.38″
511-417 511-420 (  ) Used 50mm/2″ Sub-Anvil	1	21DZA404A	50mm(100mm)/1.97″(3.94″)	17.5mm/.69″	7.5 mm/ .3″	SR1.5 mm/SR.06″	10mm/.39″	212127 212128 212129 212130	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″	21DAA596	7.5mm/.3″	50mm/2″
	2	21DZA404B	55mm(105mm)/2.17″(4.13″)	22.5mm/.89″			15mm/.59″
	3	21DZA404C	60mm(110mm)/2.36″(4.33″)	27.5mm/1.08″			20mm/.79″
	4	21DZA404D	65mm(115mm)/2.56″(4.53″)	32.5mm/1.28″			25mm/.98″
	5	21DZA404E	70mm(120mm)/2.76″(4.72″)	37.5mm/1.48″			30mm/1.18″
	6	21DZA404F	75mm(125mm)/2.95″(4.92″)	42.5mm/1.67″			35mm/1.38″
	7	21DZA404G	80mm(130mm)/3.15″(5.12″)	47.5mm/1.87″			40mm/1.57″
	8	21DZA404H	85mm(135mm)/3.35″(5.31″)	52.5mm/2.07″			45mm/1.77″
	9	21DZA404J	90mm(140mm)/3.54″(5.51″)	57.5mm/2.26″			50mm/1.97″
	10	21DZA404L	95mm(145mm)/3.74″(5.71″)	62.5mm/2.46″			55mm/2.17″
	11	21DZA404M	100mm(150mm)/3.94″(5.91″)	67.5mm/2.66″			60mm/2.36″

Technical Data
Accuracy: Metric models 4µm
Inch models .00016″
Repeatability:  Metric models 1µm
Inch models .00004″
Adjacent error:Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chapter  F)
21DZA000: Dial protection cover

Recommended dial indicators (see Chapter  F)
Metric models: 204658 (0.01mm)
2972T8 (0.01mm – One-revolution type)
210958-10 (0.001mm)
290058-10 (0.001mm – One-revolution type)
Inch models:  292258 (.0005″)
2977T8 (.0005″ – One-revolution type)
292358-10 (.0001″)
291058-10 (.0001″  – One-revolution type)

Recommended digimatic indicators (see Chapter  F)
Metric models: 543-3108 (0.001mm)
Inch models:  543-3128  (0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.

• Micrometer head is attached to the anvil for accurate dimensional setting.
• Longer plunger stroke with no affect on accuracy.
• Carbide is used for the contact point ensuring high durability and wear resistance.
• This model reduces the influence of heat from  the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
• Wide measuring range with sub-anvils.
• Alternative indicators may be used in place of  those recommended*.
  * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
• Optional extension rods can be attached for measuring deep holes. (For details, refer to page C-45.)
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.) details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set						Probing depth
					Bore gage	Dial indicator	Dial protection cover	Micrometer head	Sub-Anvil	Spanner
511-803	60-100mm	1.6mm	5N or less	10N or less	511-803	Not supplied	Not supplied	1 pc.	2 pcs.	3 pcs.	150mm
511-804	100-160mm				511-804				3 pcs.	2 pcs.
511-805	150-250mm		6N or less	15N or less	511-805				4 pcs.		250mm
511-806	250-400mm				511-806				3 pcs.
511-807	400-600mm			20N or less	511-807				2 pcs.
511-808	600-800mm				511-808				2 pcs.
511-823	60-100mm	1.6mm	5N or less	10N or less	511-803	210958-10 (Graduation: 0.001mm)	21DZA000	1 pc.	2 pcs.	3 pcs.	150mm
511-824	100-160mm				511-804				3 pcs.	2 pcs.
511-825	150-250mm		6N or less	15N or less	511-805				4 pcs.		250mm
511-826	250-400mm				511-806				3 pcs.
511-827	400-600mm			20N or less	511-807				2 pcs.
511-828	600-800mm				511-808				2 pcs.
511-813	60-100mm	1.6mm	5N or less	10N or less	511-803	204658 (Graduation: 0.01mm)	21DZA000	1 pc.	2 pcs.	3 pcs.	150mm
511-814	100-160mm				511-804				3 pcs.	2 pcs.
511-815	150-250mm		6N or less	15N or less	511-805				4 pcs.		250mm
511-816	250-400mm				511-806				3 pcs.
511-817	400-600mm			20N or less	511-807				2 pcs.
511-818	600-800mm				511-808				2 pcs.

Inch

Order No.		Range	Stroke of contact point	Measuring force	Guide force	Content of set						Probing depth
						Bore gage	Dial indicator	Dial protection cover	Micro meter head	Sub-Anvil	Spanner
511-833		2.4-4.0″	.063″	5N or less	10N or less	511-833	Not supplied	Not supplied	1 pc.	2 pcs.	3 pcs.	6″
511-834		4.0-6.4″				511-834				3 pcs.	2 pcs.
511-835		6.0-10.0″		6N or less	15N or less	511-835				4 pcs.		10″
511-836		10.0-16.0″				511-836				3 pcs.
511-837		16.0-24.0″			20N or less	511-837				2 pcs.
511-838		24.0-32.0″				511-838				2 pcs.
511-853		2.4-4.0″	.063″	5N or less	10N or less	511-833	292358-10 (Graduation: .0001″)	21DZA000	1 pc.	2 pcs.	3 pcs.	4″
511-854		4.0-6.4″				511-834				3 pcs.	2 pcs.	6″
511-855		6.0-10.0″		6N or less	15N or less	511-835				4 pcs.
511-856		10.0-16.0″				511-836				3 pcs.
511-857		16.0-24.0″			20N or less	511-837				2 pcs.		10″
511-858		24.0-32.0″				511-838				2 pcs.
511-843		2.4-4.0″	.063″	5N or less	10N or less	511-833	292258 (Graduation: .0005″)	21DZA000	1 pc.	2 pcs.	3 pcs.	4″
511-844		4.0-6.4″				511-834				3 pcs.	2 pcs.	6″
511-845		6.0-10.0″		6N or less	15N or less	511-835				4 pcs.
511-846		10.0-16.0″				511-836				3 pcs.
511-847		16.0-24.0″			20N or less	511-837				2 pcs.		10″
511-848		24.0-32.0″				511-838				2 pcs.

Notes: 1) Storage boxes for 511-807/808/837/838 models are made of wood. The boxes of other models are made of plastic.
2) It is not permissible to expand measuring range using sub-anvils other than as supplied as standard accessories. (The measurement accuracy in such cases is not guaranteed.)

Contact Points

DIMENSIONS

Range	L15	R1	L18	R2	R3	L16	0D1	0D2
60 – 100mm/2.4″  – 4″	150	SR8	28.9	SR1.0	9	38	012.8	012
100 – 160mm/4″  – 6.4″		SR10				50
150 – 250mm/6″  – 10″	250		70.3	SR1.5	12	78	019.8	015
250 – 400mm/10″  – 16″			100.9			90
400 – 600mm/16″  – 24″			200.9		16	120
600 – 800mm/24″  – 32″			300.9

Notes: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)

STANDARD ACCESSORIES

Metric

Bore gage (Main body)	Micrometer head			Sub-Anvil				Spanner
	Parts No.	Stroke	Screw size	Marked No.	Parts No.	L1	L19	Parts No.
511-803	21DZA267	10mm	M11x1	10mm	208892	15mm	10mm	301336(2 pcs.) 202863 (1 pcs.)
				20mm	208894	25mm	20mm
511-804	21DZA268	13mm	M11x1	10mm	208892	15mm	10mm	301336(2 pcs.)
				20mm	208894(2 pcs.)	25mm	20mm
511-805	21DZA268	13mm	M11x1	10mm	208892	15mm	10mm	301336 (2 pcs.)
				20mm	208894(2 pcs.)	25mm	20mm
				50mm	21DAA492	55mm	50mm
511-806	953118	25mm	M16x1	25mm	208926	35mm	25mm	200154(2 pcs.)
				50mm	208928(2 pcs.)	60mm	50mm
511-807	953120	50mm	M16x1	50mm	208928	60mm	50mm	200154(2 pcs.)
				100mm	208932	110mm	100mm
511-808	953120	50mm	M16x1	50mm	208928	60mm	50mm	200154(2 pcs.)
				100mm	208932	110mm	100mm

Inch

Bore gage (Main body)	Micrometer head			Sub-Anvil				Spanner
	Parts No.	Stroke	Screw size	Marked No.	Parts No.	L1	L19	Parts No.
511-833	21DZA272	.4″	M11x1	.4″	208893	.6″	.4″	301336(2 pcs.) 202863 (1 pcs.)
				.8″	208895	1.0″	.8″
511-834	21DZA273	.5″	M11x1	.4″	208893	.6″	.4″	301336(2 pcs.)
				.8″	208895(2 pcs.)	1.0″	.8″
511-835	21DZA273	.5″	M11x1	.4″	208893	.6″	.4″	301336 (2 pcs.)
				.8″	208895(2 pcs.)	1.0″	.8″
				2″	21DAA493	2.2″	2″
511-836	21DZA275	1.0″	M16x1	1″	208927	1.4″	1″	200154(2 pcs.)
				2″	208929(2 pcs.)	2.4″	2″
511-837	902313	2.0″	M16x1	2″	208929	2.4″	2″	200154(2 pcs.)
				4″	208933	4.4″	4″
511-838	902313	2.0″	M16x1	2″	208929	2.4″	2″	200154(2 pcs.)
				4″	208933	4.4″	4″

Technical Data
Accuracy: Metric models 2µm
Inch models .00008″
Repeatability:   Metric models 0.5µm
Inch models .00002″
Adjacent error: Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chaptern  F)
21DZA000: Dial protection cover
Recommended dial indicators (see Chapter F)
Metric models: 2046S8 (0.01mm)
2972T8 (0.01mm – One-revolution type)
2109S8-10 (0.001mm)
2900S8-10 (0.001mm – One-revolution type)
Inch models: 2922S8 (.0005″)
2977T8 (.0005″ – One-revolution type)
2923S8-10 (.0001″)
2910S8-10 (.0001″  – One-revolution type)

Recommended  digimatic indicators (see Chapter F)
Metric models: 543-3108 (ID-C112GXB: 0.001mm)
Inch models: 543-3128 (ID-C112GEXB: 0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.

• Compact and lightweight due to the short length below the grip.
• Longer plunger stroke with no affect on accuracy.
• Carbide contact point ensuring high durability and wear resistance.
• This model reduces the influence of heat from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
• Alternative indicators may be used in plathose recommended*.
  * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models.
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47.)

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner
511-761	18-35mm	1.2mm	4N or less	6N or less	511-761	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	50mm
511-762	35-60mm				511-762			6 pcs.	4 pcs.		Not supplied
511-763	50-150mm	1.6mm	5N or less	10N or less	511-763			11 pcs.		1 pc.
511-764	100-160mm				511-764			13 pcs.		Not supplied
511-771	18-35mm	1.2mm	4N or less	6N or less	511-761	21O958-1O (Graduation: 0.001mm)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	50mm
511-772	35-60mm				511-762			6 pcs.	4 pcs.		Not supplied
511-773	50-150mm	1.6mm	5N or less	10N or less	511-763			11 pcs.		1 pc.
511-774	100-160mm				511-764			13 pcs.		Not supplied
511-766	18-35mm	1.2mm	4N or less	6N or less	511-761	2O4658 (Graduation: 0.01mm)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	50mm
511-767	35-60mm				511-762			6 pcs.	4 pcs.		Not supplied
511-768	50-150mm	1.6mm	5N or less	10N or less	511-763			11 pcs.		1 pc.
511-769	100-160mm				511-764			13 pcs.		Not supplied

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner
511-781	.7-1.4″	.047″	4N or less	6N or less	511-781	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	2″
511-782	1.4-2.5″				511-782			6 pcs.	4 pcs.		Not supplied
511-783	2.0-6.0″	.063″	5N or less	10N or less	511-783			11 pcs.		1 pc.
511-784	4.0-6.5″				511-784			13 pcs.		Not supplied
511-791	.7-1.4″	.047″	4N or less	6N or less	511-781	292358-1O (Graduation: .0001″)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	2″
511-792	1.4-2.5″				511-782			6 pcs.	4 pcs.		Not supplied
511-793	2.0-6.0″	.063″	5N or less	10N or less	511-783			11 pcs.		1 pc.
511-794	4.0-6.5″				511-784			13 pcs.		Not supplied
511-786	.7-1.4″	.047″	4N or less	6N or less	511-781	292258 (Graduation: .0005″)	21DZAOOO	9 pcs.	2 pcs.	Not supplied	1 pc.	2″
511-787	1.4-2.5″				511-782			6 pcs.	4 pcs.		Not supplied
511-788	2.0-6.0″	.063″	5N or less	10N or less	511-783			11 pcs.		1 pc.
511-789	4.0-6.5″				511-784			13 pcs.		Not supplied

Notes: 1) A 50mm  sub-anvil is supplied with 511-763.
2) A 2″ sub-anvil is supplied with 511-783.
3) It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils.
(The measurement  accuracy in such cases is not guaranteed.)

DIMENSIONS

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable washer		Spanner
	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t	Parts No.
511-761 511-781	1	21DZA213A	18mm/.71″	5.5mm/.22″	2.5mm/.10″	205623 205624	0.5mm/.02″ 1.0mm/.04″	102148
	2	21DZA213B	20mm/.79″	7.5mm/.30″	4.5mm/.18″
	3	21DZA213C	22mm/.87″	9.5mm/.37″	6.5mm/.26″
	4	21DZA213D	24mm/.94″	11.5mm/.45″	8.5mm/.33″
	5	21DZA213E	26mm/1.02″	13.5mm/.53″	10.5mm/.41″
	6	21DZA213F	28mm/1.10″	15.5mm/.61″	12.5mm/.49″
	7	21DZA213G	30mm/1.18″	17.5mm/.69″	14.5mm/.57″
	8	21DZA213H	32mm/1.26″	19.5mm/.77″	16.5mm/.65″
	9	21DZA213J	34mm/1.34″	21.5mm/.85″	18.5mm/.73″

DIMENSIONS

Notes: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple subanvils.
(The measurement accuracy in such cases is not guaranteed.)

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable washer		Sub-Anvil
	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t	Parts No.
511-762 511-782	1	21DZA232A	35mm/1.38″	15mm/.59″	5.5mm/.22″
	2	21DZA232B	40mm/1.57″	20mm/.79″	10.5mm/.41″
	3	21DZA232C	45mm/1.77″	25mm/.98″	15.5mm/.61″
	4	21DZA232D	50mm/1.97″	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	55mm/2.17″	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	60mm/2.36″	40mm/1.57″	30.5mm/1.20″
511-763 511-783 (  ) Used 50mm/2″ Sub-Anvil	1	21DZA232A	50mm (100mm)/1.97″ (3.94″)	15mm/.59″	5.5mm/.22″			102178 (50mm/2″)
	2	21DZA232B	55mm (105mm)/2.17″ (4.13″)	20mm/.79″	10.5mm/.41″
	3	21DZA232C	60mm (110mm)/2.36″ (4.33″)	25mm/.98″	15.5mm/.61″
	4	21DZA232D	65mm (115mm)/2.55″ (4.53″)	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	70mm (120mm)/2.74″ (4.72″)	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	75mm (125mm)/2.93″ (4.92″)	40mm/1.57″	30.5mm/1.20″
	7	21DZA232G	80mm (130mm)/3.12″ (5.12″)	45mm/1.77″”	35.5mm/1.40″
	8	21DZA232H	85mm (135mm)/3.31″ (5.31″)	50mm/1.97″”	40.5mm/1.59″	205457 205458 205459 205460	0.5mm/.02″ 1.0mm/.04″ 2.0mm/.08″ 3.0mm/.12″
	9	21DZA232J	90mm (140mm)/3.50″ (5.51″)	55mm/2.17″	45.5mm/1.79″
	10	21DZA232L	95mm (145mm)/3.69″ (5.71″)	60mm/2.36″	50.5mm/1.99″
	11	21DZA232M	100mm (150mm)/3.88″ (5.91″)	65mm/2.56″	55.5mm/2.19″
511-764 511-784	1	21DZA232A	100mm/3.94″	15mm/.59″	5.5mm/.22″
	2	21DZA232B	105mm/4.13″	20mm/.79″	10.5mm/.41″
	3	21DZA232C	110mm/4.33″	25mm/.98″	15.5mm/.61″
	4	21DZA232D	115mm/4.53″	30mm/1.18″	20.5mm/.81″
	5	21DZA232E	120mm/4.72″	35mm/1.38″	25.5mm/1.00″
	6	21DZA232F	125mm/4.92″	40mm/1.57″	30.5mm/1.20″
	7	21DZA232G	130mm/5.12″	45mm/1.77″	35.5mm/1.40″
	8	21DZA232H	135mm/5.31″	50mm/1.97″	40.5mm/1.59″
	9	21DZA232J	140mm/5.51″	55mm/2.17″	45.5mm/1.79″
	10	21DZA232L	145mm/5.71″	60mm/2.36″	50.5mm/1.99″
	11	21DZA232M	150mm/5.91″	65mm/2.56″	55.5mm/2.19″
	12	21DZA232N	155mm/6.10″	70mm/2.76″	60.5mm/2.38″
	13	21DZA232P	160mm/6.30″	75mm/2.95″	65.5mm/2.58″

Technical Data
Accuracy: Metric models 2µm
Inch models .00008″
Repeatability: Metric models 0.5µm
Inch models .00002″
Adjacent error: Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chapter  F)
21DZA000: Dial protection cover

Recommended dial indicators (see Chapter  F)
Metric models: 2046SB (0.01mm)
2972TB (0.01mm – One-revolution type)
2109SB-10 (0.001mm)
2900SB-10 (0.001mm – One-revolution type)
Inch models: 2922SB (.0005″)
2977TB (.0005″ – One-revolution type)
2923SB-10 (.0001″)
2910SB-10 (.0001″  – One-revolution type)

Recommended digimatic indicators (see Chapter  F)
Metric models: 543-310B (ID-C112GXB, 0.001mm)
Inch models: 543-312B (ID-C112GEXB, 0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.

Contact Points

• Longer plunger stroke with no affect on accuracy.
• Carbide is used for the contact point ensuring high durability and wear resistance.
• This model reduces the  influence  of heat  from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
• Alternative indicators may be used in place of those recommended*.
  * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended  models.

• Optional extension rods can be attached for measuring deep holes. (For details, refer to page C-45.)
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to pages C-46 and C-47).

SPECIFICATIONS

Metric

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner
511-701	18-35mm	1.2mm	4N or less	6N or less	511-701	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	100mm
511-702	35-60mm				511-702			6 pcs.	4 pcs.		Not supplied	150mm
511-703	50-150mm	1.6mm	5N or less	10N or less	511-703			11 pcs.		1 pc.
511-704	100-160mm				511-704			13 pcs.		Not supplied
511-705	160-250mm		6N or less	15N or less	511-705			6 pcs.	7 pcs.			250mm
511-706	250-400mm				511-706			5 pcs.		1 pc.
511-721	18-35mm	1.2mm	4N or less	6N or less	511-701	210958-10 (Graduation: 0.001mm)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	100mm
511-722	35-60mm				511-702			6 pcs.	4 pcs.		Not supplied	150mm
511-723	50-150mm	1.6mm	5N or less	10N or less	511-703			11 pcs.		1 pc.
511-724	100-160mm				511-704			13 pcs.		Not supplied
511-725	160-250mm		6N or less	15N or less	511-705			6 pcs.	7 pcs.			250mm
511-726	250-400mm				511-706			5 pcs.		1 pc.
511-711	18-35mm	1.2mm	4N or less	6N or less	511-701	204658 (Graduation: 0.01mm)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	100mm
511-712	35-60mm				511-702			6 pcs.	4 pcs.		Not supplied	150mm
511-713	50-150mm	1.6mm	5N or less	10N or less	511-703			11 pcs.		1 pc.
511-714	100-160mm				511-704			13 pcs.		Not supplied
511-715	160-250mm		6N or less	15N or less	511-705			6 pcs.	7 pcs.			250mm
511-716	250-400mm				511-706			5 pcs.		1 pc.
511-921	18-150mm	–	–	–	511-701 511-702 511-703	204658	21DZA000	–	–	–	–	–
511-922						210958-10
511-925-10						543-3108

Inch

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set							Probing
					Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer	Sub-Anvil	Spanner
511-731	.7-1.4″	.047″	4N or less	6N or less	511-731	Not supplied	Not supplied	9 pcs.	2 pcs.	Not supplied	1 pc.	4″
511-732	1.4-2.5″				511-732			6 pcs.	4 pcs.		Not supplied	6″
511-733	2.0-6.0″	.063″	5N or less	10N or less	511-733			11 pcs.		1 pc.
511-734	4.0-6.5″				511-734			13 pcs.		Not supplied
511-735	6.5-10.0″		6N or less	15N or less	511-735			6 pcs.	7 pcs.			10″
511-736	10.0-16.0″				511-736			5 pcs.		1 pc.
511-751	.7-1.4″	.047″	4N or less	6N or less	511-731	292358-10 (Graduation: .0001″)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	4″
511-752	1.4-2.5″				511-732			6 pcs.	4 pcs.		Not supplied	6″
511-753	2.0-6.0″	.063″	5N or less	10N or less	511-733			11 pcs.		1 pc.
511-754	4.0-6.5″				511-734			13 pcs.		Not supplied
511-755	6.5-10.0″		6N or less	15N or less	511-735			6 pcs.	7 pcs.			10″
511-756	10.0-16.0″				511-736			5 pcs.		1 pc.
511-741	.7-1.4″	.047″	4N or less	6N or less	511-731	292258 (Graduation: .0005″)	21DZA000	9 pcs.	2 pcs.	Not supplied	1 pc.	4″
511-742	1.4-2.5″				511-732			6 pcs.	4 pcs.		Not supplied	6″
511-743	2.0-6.0″	.063″	5N or less	10N or less	511-733			11 pcs.		1 pc.
511-744	4.0-6.5″				511-734			13 pcs.		Not supplied
511-745	6.5-10.0″		6N or less	15N or less	511-735			6 pcs.	7 pcs.			10″
511-746	10.0-16.0″				511-736			5 pcs.		1 pc.
511-931	.7-6.0″	–	–	–	511-731 511-732 511-733	292258	21DZA000	–	–	–	–	–
511-932						292358-10
511-935-10						543-3128

Notes:
1) A 50mm sub-anvil is supplied with 511-703, and a 75mm sub-anvil is supplied with 511-706.
2) A 2″ sub-anvil is supplied with 511-733, and a 3″ sub-anvil is supplied with 511-736.
3) It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.)

Contact Points

DIMENSIONS

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable washer		Spanner
	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	t	Parts No.
511-701 511-731	1	21DZA213A	18mm/.71″	5.5mm/2.17″	2.5mm/.10″	205623 205624	0.5mm/.02″ 1.0mm/.04″	102148
	2	21DZA2138	20mm/.79″	7.5mm/2.95″	4.5mm/.18″
	3	21DZA213C	22mm/.87″	9.5mm/3.74″	6.5mm/.26″
	4	21DZA213D	24mm/.94″	11.5mm/4.53″	8.5mm/.33″
	5	21DZA213E	26mm/1.02″	13.5mm/5.31″	10.5mm/.41″
	6	21DZA213F	28mm/1.10″	15.5mm/6.10″	12.5mm/.49″
	7	21DZA213G	30mm/1.18″	17.5mm/6.89″	14.5mm/.57″
	8	21DZA213H	32mm/1.26″	19.5mm/7.68″	16.5mm/.65″
	9	21DZA213J	34mm/1.34″	21.5mm/8.46″	18.5mm/.73″

Technical Data
Accuracy: Metric models 2µm
Inch models .00008″
Repeatability:   Metric models 0.5µm
Inch models .00002″
Adjacent error: Metric models 1µm
Inch models .00004″

Optional Accessories
-: Dial indicator (See Chapter  F)
21DZA000: Dial protection cover

Recommended dial indicators (see Chapter  F)
Metric models: 2046S8 (0.01mm)
2972T8 (0.01mm – One revolution type)
2109S8-10 (0.001mm)
2900S8-10 (0.001mm – One-revolution type)
Inch models:  2922S8 (.0005″)
2977T8 (.0005″- One-revolution type)
2923S8-10 (.0001″)
2910S8-10 (.0001″  – One-revolution type)

Recommended digimatic indicators (see Chapter  F)
Metric models: 543-3108 (ID-C112GXB: 0.001mm)
Inch models:  543-3128 (ID-C112GEXB: 0.001mm/.00005″)
* Indicators equipped with rubber bellows, such as water- proof types, cannot be used.

• Alternative indicators may be used in place of those recommended*.
  • Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic  indicators other than the recommended models.
• Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to page C-47)

SPECIFICATIONS

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer
511-209	6-10mm	0.Smm	2N or less	—	511-209	Not supplied	Not supplied	9 pcs.	Not supplied	S0mm
511-201	10-18.Smm	0.6mm		6N or less	511-201				1 pc.	100mm
511-210	6-10mm	0.Smm	2N or less	—	511-209	210958-10 (Graduation: 0.001mm)	21DZA000	9 pcs.	Not supplied	S0mm
511-203	10-18.Smm	0.6mm		6N or less	511-201				1 pc.	100mm
511-211	6-10mm	0.Smm	2N or less	—	511-209	204658 (Graduation: 0.01mm)	21DZA000	9 pcs.	Not supplied	S0mm
511-204	10-18.Smm	0.6mm		6N or less	511-201				1 pcs.	100mm

Order No.	Range	Stroke of contact point	Measuring force	Guide force	Content of set					Probing depth
					Bore gage	Dial indicator	Dial protection cover	Anvil	Interchangeable Washer
511-214	.24-.4″	.020″	2N or less	—	511-214	Not supplied	Not supplied	9 pcs.	Not supplied	2″
511-205	.4-.74″	.024″		6N or less	511-205				1 pc.	4″
511-212	.24-.4″	.020″	2N or less	—	511-214	292358-10 (Graduation: .0001″)	21DZA000	9 pcs.	Not supplied	2″
511-206	.4-.74″	.024″		6N or less	511-205				1 pc.	4″
511-213	.24-.4″	.020″	2N or less	—	511-214	292258 (Graduation: .000S”)	21DZA000	9 pcs.	Not supplied	2″
511-207	.4-.74″	.024″		6N or less	511-205				1 pc.	4″

DIMENSIONS

STANDARD ACCESSORIES

Bore gage (Main body)	Anvil					Interchangeable Washer	Spanner
	Marked No.	Parts No.	Indication of measuring size	L1	L13	Parts No.	Parts No.
511-209 511-214	1	952168	6.0mm/.24″	4.7mm/.19″	1.2mm/.05″	Not supplied	206709
	2	952169	6.5mm/.26″	5.3mm/.21″	1.7mm/.07″
	3	952170	7.0mm/.28″	5.8mm/.23″	2.2mm/.09″
	4	952414	7.5mm/.30″	6.3mm/.25″	2.7mm/.11″
	5	952415	8.0mm/.32″	6.8mm/.27″	3.2mm/.13″
	6	952416	8.5mm/.34″	7.3mm/.29″	3.7mm/.15″
	7	952417	9.0mm/.36″	7.8mm/.31″	4.2mm/.17″
	8	952418	9.5mm/.38″	8.3mm/.33″	4.7mm/.19″
	9	952419	10.0mm/.40″	8.8mm/.35″	5.2mm/.21″

Bore gage (Main body)	Anvil					Interchangeable Washer	Spanner
	Marked No.	Parts No.	Indication of measuring size	L1	L14	Parts No.	Parts No.
511-201* 511-205	1	204356	10mm/.40″	3.8mm/.15″	2mm/.08″	204355	204354
	2	204357	11mm/.44″	4.8mm/.19″	3mm/.12″
	3	204358	12mm/.48″	5.8mm/.23″	4mm/.16″
	4	204359	13mm/.52″	6.8mm/.27″	5mm/.20″
	5	204360	14mm/.56″	7.8mm/.31″	6mm/.24″
	6	204361	15mm/.60″	8.8mm/.35″	7mm/.28″
	7	204362	16mm/.64″	9.8mm/.39″	8mm/.32″
	8	204363	17mm/.68″	10.8mm/.43″	9mm/.36″
	9	204364	18mm/.72″	11.8mm/.46″	10mm/.40″

* Equipped with an anvil fixing plate.

Close-up view of anvils and contact points

Technical Data
Accuracy: Metric models: Sµm
Inch models: .0002″
Repeatability:  Metric modes: 2µm
Inch models: .00008″
Adjacent error: Metric modes: 2µm
Inch models: .00008″

Optional Accessories
– : Dial indicator (See Chapter  F)
21DZA000: Dial protection cover

Recommended digimatic indicators (see Chapter F)
Metric models: 204658 (0.01mm)
2972T8 (0.01mm – One-revolution type)
210958-10 (0.001mm)
290058-10 (0.001mm – One-revolution type)
Inch models: 292258 (.000S”)
2977T8 (.000S” – One-revolution type)
292358-10 (.0001″)
291058-10 (.0001″  – One-revolution type)

Recommended digimatic indicators (see Chapter  F)
Metric models: 543-3108 (ID-C112GXB: 0.001mm)
Inch models: 543-3128 (ID-C112GEXB: 0.001mm/.0000S”)
* Indicators equipped with rubber bellows, such as water- proof types, cannot be used.