• Double-column structure ensures high measuring accuracy.
• Ergonomic base fits comfortably in the hand.
• Bidirectional touch-trigger probe is available as an optional accessory.
• Character height of the LCD display has been increased (10mm to 11mm) and a high- contrast LCD display unit adopted, so that the readability is improved.
• Inclined handle improves slider ergonomics.
• Allows integration into statistical process control and measurement systems. Refer to page A-3.
• Battery: SR44 (1 pc), 938882. For initial  Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
• Battery life is 3,500 hours in continuous use.
• Carbide-tipped long scriber (No. 905200 with overall length of 150mm) is provided as a standard accessory. (Standard accessory: scriber cramp No. 05GZA033)
• For precision Black Granite Surface Plates, refer to page E-51.

SPECIFICATIONS

Metric

Order No.	Range	Resolution	Accuracy*	Repeatability	Max. response speed	Height	Mass
192-663-10	0 – 300mm	0.01mm (0.005mm)	±0.02mm	0.01mm	500mm/s	510mm	5.7kg
192-664-10	0 – 600mm		±0.04mm			802mm	8.3kg
192-665-10	0 – 1000mm		±0.06mm			1228mm	15.7kg

* Excluding quantizing error
Inch/Metric

Order No.	Range	Resolution	Accuracy*	Repeatability	Max. response speed	Height	Mass
192-670-10	0 – 12″	.0005″/0.01mm (.0002″  /0.005mm)	±.001″	0.01mm	500mm/s	510mm	5.7kg
192-671-10	0 – 18″		±.0015″			649mm	7.5kg
192-672-10	0 – 24″		±.0015″			802mm	8.3kg
192-673-10	0 – 40″		±.0025″			1228mm	15.7kg

* Excluding quantizing error

Functions
Origin-setting (ABS measurement mode):   Any arbitrary value can be stored as the origin point.

Zero-setting (INC measurement mode):  Displayed value can be set to zero at any arbitrary position of the slider.

Origin restoration:  Previously set origin is restored when switching back to ABS mode.

Presetting (ABS INC measurement mode):  Displayed value can be set to any arbitrary value, including negative values.

Measuring direction

Measuring direction can be switched at the press of a button.Data hold  Display value can be held. Reverts to ABS or INC mode when cancelled.

Alarm: Error message is displayed when overflow or overspeed of displayed value arises and measurement is stopped.

Data output:   Allows integration into statistical process control and measurement systems. (Refer to page A-3.)

Fine and coarse height adjustment through knob and wheel combination.

Slider height adjustment wheel allows fine and coarse height adjustment.

Push the small fine-adjustment knob in to disengage gearing and then turn the large wheel.

Pull the fine-adjustment knob out to engage gearing and then turn this knob, which then slowly turns the wheel.

Low-voltage alert:  When battery voltage becomes low, a warning appears in the display.

Probe-tip diameter compensation:  An adjustment is applied to the raw measurement data to compensate for the effect of the size of the spherical contact point used by the bidirectional touch-trigger probe.

Presetting (2 positions)

With two preset functions,  two reference heights can be used relative to a surface plate.

• Example of preset 1
  To measure  a height of 70mm, with a reference plane height of 50mm
• Example of preset 2
  To measure  a height of 130mm, with a reference plane height of 150mm

DIMENSIONS

Optional Accessory

Bidirectional touch-trigger probe
Improves accuracy in step, internal thickness, and outside width measurement by minimizing reproducibility error.

SPECIFICATIONS
Metric

Order No.	Measuring direction	Relay contact type	Probe overtravel	Probe size	Repeatability	Measuring force	Standard accessories
192-007	Bidirectional	Normally Open	1.5mm	ø3mm	: 2μm	0.4N	Holder arm, Clamp

Inch

Order No.	Measuring direction	Relay contact type	Probe overtravel	Probe size	Repeatability	Measuring force	Standard accessories
192-008	Bidirectional	Normally Open	1.5mm	ø3mm	: 2μm	0.4N	Holder arm, Clamp

For details of the connecting cable, refer to page D-39.

Connecting cables for IT/DP/MUX
905338: SPC cable (1m)
905409: SPC cable (2m)
USB Input Tool Direct
06ADV380F: SPC cable for USB-ITN-F (2m)
Connecting cables for U-WAVE-T
02AZD790F: SPC cable for U-WAVE (160mm)
02AZE140F: SPC cable for footswitch

MULTIMAR 844 TA SHOULDER ANVILS

• With cylindrical mounting shaft to attach into the mounting attachments 844 Tma / 844 Tmi
• Flat; for external diameters
• Made of hardened steel

Technical data

Order no.	Mounting shaft diameter in mm
4500050	5 mm

Applications

• For measuring narrow collars such as centering shoulders and other similar measuring tasks

MULTIMAR 844 TI SHOULDER ANVILS

• With cylindrical mounting shaft to attach into the mounting attachments 844 Tma / 844 Tmi
• Semi-cylindrical, for internal diameters
• Made of hardened steel

Technical data

Applications

• Flat; for external diameters, distance and widths

MULTIMAR 844 TS MEASURING ANVILS

• Made of hardened steel
• With cylindrical mounting shank and retainer ring which allows free rotation inside the bore of measuring arms 844 Te

Technical data

Order no.	Mounting shaft diameter in mm
4500045	3,5 mm

Applications

• Spherical; for internal diameters

MULTIMAR 844 TB MEASURING ANVILS WITH MEASURING BLADES

• With cylindrical holding shaft for fixing in 844 Tma / 844 Tmi mounting attachments
• Can be moved in the mounting attachment for setting the measuring depth
• With round measuring blade
• Suitable for workpieces with narrow recesses up to 3 mm deep
• Made of hardened steel

Technical data

Order no.	Platelet diameter	Mounting shaft diameter in mm	Adjustment range start in mm	Adjustment range	Adjustment range end in mm
4503015	11 mm	5 mm	0 mm	0 – 20	20 mm
4503016	11 mm	5 mm	20 mm	20 – 40	40 mm

Applications

• For measuring centering shoulders and recesses on internal and external diameters; consists of a pin type holder, which is be moved to set the measuring depth in Mounting Attachment 844 Tm and a mounted measuring blade

MULTIMAR 844 TC MEASURING ANVILS WITH MEASURING BLADES

• With cylindrical holding shaft for fixing in 844 Tma / 844 Tmi mounting attachments
• Can be moved in the mounting attachment for setting the measuring depth
• With long measuring blade
• Suitable for workpieces with narrow recesses up to 7.5 mm deep
• Made of hardened steel

Technical data

Order no.	Platelet length	Mounting shaft diameter in mm	Adjustment range start in mm	Adjustment range	Adjustment range end in mm
4503114	20 mm	5 mm	0 mm	0 – 20	20 mm
4503115	20 mm	5 mm	20 mm	20 – 40	40 mm

Applications

• For measuring centering shoulders and recesses on internal and external diameters; consists of a pin type holder, which is be moved to set the measuring depth in Mounting Attachment 844 Tm and a mounted measuring blade

MULTIMAR 844 TD ANVILS WITH ROUND MEASURING FACES

• With cylindrical holding shaft for fixing in 844 Tma / 844 Tmi mounting attachments
• Made of hardened steel
• Can be moved in the mounting attachment for setting the measuring depth
• With round measuring blade
• Suitable for workpieces with recesses up to 3 mm deep

Technical data

Order no.	Mounting shaft diameter in mm	Adjustment range
4503017	5 mm	0 – 20
4503018	5 mm	20 – 40

Applications

Zur Messung von Innen- und Außenmaßen an Runden oder Zylindrischen Teilen

MULTIMAR 844 TK BALL ANVILS

• Measuring ball made of carbide
• With cylindrical mounting shank and retainer ring which allows free rotation inside the bore of Measuring Arms 844 Te
• Manufactoring tolerance ball ± 2 µm

Technical data

Order no.	Mounting shaft diameter in mm	Shaft length	Dimensions d in mm
4500350	***i95180***	6 mm	1 mm
4500351	***i95067***	6 mm	1.25 mm
4500352	***i95009***	6 mm	1.5 mm
4500353	***i95123***	6 mm	1.75 mm
4500354	***i94807***	6 mm	2 mm
4500356	***i94894***	6 mm	2.5 mm
4500357	***i95151***	6 mm	3 mm
4500358	***i94836***	6 mm	3.5 mm
4500359	***i94951***	6 mm	4 mm
4500360	***i94923***	6 mm	4.5 mm
4500361	***i94865***	6 mm	5 mm
4500362	***i94980***	6 mm	5.5 mm
4500363	***i95038***	6 mm	6 mm
4500618	***i95095***	6 mm	2.75 mm
4502540	***i96555***	6 mm	2.25 mm
4502541	***i95797***	6 mm	3.25 mm
4502542	***i96161***	6 mm	6.5 mm
4502543	***i96049***	6 mm	2.032 mm
4502544	***i95601***	6 mm	2.3 mm
4502545	***i95349***	6 mm	6.35 mm
4502547	***i96330***	6 mm	7 mm
4502548	***i96302***	6 mm	8 mm
4502549	***i95741***	6 mm	9 mm
4502550	***i95657***	6 mm	10 mm
4502620	***i95433***	6 mm	0.5 mm
4502621	***i95489***	6 mm	0.551 mm
4502622	***i96415***	6 mm	0.62 mm
4502623	***i96499***	6 mm	0.623 mm
4502624	***i95573***	6 mm	0.63 mm
4502625	***i96246***	6 mm	0.722 mm
4502626	***i95629***	6 mm	0.862 mm
4502627	***i96077***	6 mm	0.895 mm
4502628	***i95461***	6 mm	0.965 mm
4502629	***i95209***	6 mm	1.1 mm
4502630	***i96387***	6 mm	1.118 mm
4502631	***i95377***	6 mm	1.125 mm
4502632	***i95321***	6 mm	1.35 mm
4502633	***i95685***	6 mm	1.372 mm
4502634	***i95853***	6 mm	1.385 mm
4502635	***i95545***	6 mm	1.524 mm
4502636	***i96133***	6 mm	1.54 mm
4502637	***i95405***	6 mm	1.6 mm
4502638	***i96274***	6 mm	1.65 mm
4502639	***i96218***	6 mm	1.7 mm
4502640	***i95825***	6 mm	1.782 mm
4502641	***i95713***	6 mm	1.8 mm
4502642	***i95293***	6 mm	1.829 mm
4502643	***i95881***	6 mm	1.9 mm
4502644	***i95993***	6 mm	2.284 mm
4502645	***i96105***	6 mm	2.386 mm
4502646	***i96527***	6 mm	2.438 mm
4502647	***i95769***	6 mm	2.667 mm
4502648	***i96021***	6 mm	2.704 mm
4502649	***i96190***	6 mm	2.713 mm
4502650	***i95517***	6 mm	2.721 mm
4502651	***i96359***	6 mm	2.743 mm
4502652	***i96443***	6 mm	3.048 mm
4502653	***i95937***	6 mm	3.4 mm
4502654	***i95237***	6 mm	3.658 mm
4502655	***i95965***	6 mm	4.835 mm
4502656	***i96471***	6 mm	5.25 mm
4502657	***i95909***	6 mm	5.486 mm
4502658	***i95265***	6 mm	6.096 mm

Applications

• Especially suited for the measurement of internal or external helical gear wheels.

MULTIMAR 844 TZ CYLINDRICAL MEASURING PINS

• With cylindrical holding shaft for fixing in 844 Tma / 844 Tmi mounting attachments
• Made of hardened steel

Technical data

Order no.	Mounting shaft diameter in mm	Dimension D	Manufacturing tolerance +/-
4500500	5 mm	1 mm	2 µm
4500501	5 mm	1.25 mm	2 µm
4500502	5 mm	1.5 mm	2 µm
4500503	5 mm	1.75 mm	2 µm
4500504	5 mm	2 mm	2 µm
4500506	5 mm	2.5 mm	2 µm
4500507	5 mm	3 mm	2 µm
4500508	5 mm	3.5 mm	2 µm
4500509	5 mm	4 mm	2 µm
4500510	5 mm	4.5 mm	2 µm
4500511	5 mm	5 mm	2 µm
4500512	5 mm	5.5 mm	2 µm
4500513	5 mm	6 mm	2 µm

Applications

• Determination of the dimension over 2 pins for inner and outer gears

MULTIMAR – MEASURING ELEMENTS FOR THREAD

MULTIMAR 844 TV INTERCHANGEABLE MEASURING ROLLERS

• With cylindrical holding shaft for fixing in 844 Tma / 844 Tmi mounting attachments
• Made of hardened steel
• Each with two springs to aid insertion in correct thread turn
• Contact rollers for other thread pitches (metric 60°) as well as for Whitworth and UST thread on request

Technical data

Order no.	Pitch angle in degrees	Mounting shaft diameter in mm	Type of thread	Thread pitch in mm	Thread parameter	Dimensions d in mm
4501711	60°	5 mm	Metric thread	1	Pitch diameter	5 mm
4501715	60°	5 mm	Metric thread	2	Pitch diameter	5 mm
4501716	60°	5 mm	Metric thread	2,5	Pitch diameter	5 mm
4501718	60°	5 mm	Metric thread	3,5	Pitch diameter	5 mm
4501719	60°	5 mm	Metric thread	4	Pitch diameter	5 mm
4501721	60°	5 mm	Metric thread	5	Pitch diameter	5 mm
4501723	60°	5 mm	Metric thread	6	Pitch diameter	5 mm

Applications

• Determining the pitch diameter of outer and inner threads

MULTIMAR 844 TV INTERCHANGEABLE MEASURING ROLLERS

• Made of hardened steel

Technical data

Order no.	Pitch angle in degrees	Type of thread	Thread pitch in mm	Thread parameter	Thread pitch in TPI	Dimensions d in mm
4521105	60	Metric thread	0,5	Pitch diameter		5.5 mm
4521106	60	Metric thread	0,6	Pitch diameter		5.5 mm
4521107	60	Metric thread	0,7	Pitch diameter		5.5 mm
4521108	60	Metric thread	0,75	Pitch diameter		5.5 mm
4521109	60	Metric thread	0,8	Pitch diameter		5.5 mm
4521110	60	Metric thread	0,9	Pitch diameter		5.5 mm
4521111	60	Metric thread	1	Pitch diameter		5.5 mm
4521112	60	Metric thread	1,25	Pitch diameter		5.5 mm
4521113	60	Metric thread	1,5	Pitch diameter		5.5 mm
4521114	60	Metric thread	1,75	Pitch diameter		5.5 mm
4521115	60	Metric thread	2	Pitch diameter		5.5 mm
4521116	60	Metric thread	2,5	Pitch diameter		5.5 mm
4521117	60	Metric thread	3	Pitch diameter		5.5 mm
4521118	60	Metric thread	3,5	Pitch diameter		5.5 mm
4521119	60	Metric thread	4	Pitch diameter		5.5 mm
4521120	60	Metric thread	4,5	Pitch diameter		5.5 mm
4521121	60	Metric thread	5	Pitch diameter		5.5 mm
4521122	60	Metric thread	5,5	Pitch diameter		5.5 mm
4521123	60	Metric thread	6	Pitch diameter		5.5 mm
4521200	55	Whitworth thread		Pitch diameter	6	5.5 mm
4521201	55	Whitworth thread		Pitch diameter	7	5.5 mm
4521202	55	Whitworth thread		Pitch diameter	8	5.5 mm
4521203	55	Whitworth thread		Pitch diameter	9	5.5 mm
4521204	55	Whitworth thread		Pitch diameter	10	5.5 mm
4521205	55	Whitworth thread		Pitch diameter	11	5.5 mm
4521206	55	Whitworth thread		Pitch diameter	12	5.5 mm
4521207	55	Whitworth thread		Pitch diameter	13	5.5 mm
4521208	55	Whitworth thread		Pitch diameter	14	5.5 mm
4521209	55	Whitworth thread		Pitch diameter	16	5.5 mm
4521210	55	Whitworth thread		Pitch diameter	18	5.5 mm
4521211	55	Whitworth thread		Pitch diameter	19	5.5 mm
4521212	55	Whitworth thread		Pitch diameter	20	5.5 mm
4521213	55	Whitworth thread		Pitch diameter	22	5.5 mm
4521214	55	Whitworth thread		Pitch diameter	24	5.5 mm
4521215	55	Whitworth thread		Pitch diameter	28	5.5 mm
4521216	55	Whitworth thread		Pitch diameter	30	5.5 mm
4521217	55	Whitworth thread		Pitch diameter	32	5.5 mm
4521218	55	Whitworth thread		Pitch diameter	36	5.5 mm
4521219	55	Whitworth thread		Pitch diameter	40	5.5 mm
4521300	60	UST Thread		Pitch diameter	6	5.5 mm
4521301	60	UST Thread		Pitch diameter	7	5.5 mm
4521302	60	UST Thread		Pitch diameter	8	5.5 mm
4521303	60	UST Thread		Pitch diameter	9	5.5 mm
4521304	60	UST Thread		Pitch diameter	10	5.5 mm
4521305	60	UST Thread		Pitch diameter	11	5.5 mm
4521306	60	UST Thread		Pitch diameter	12	5.5 mm
4521307	60	UST Thread		Pitch diameter	13	5.5 mm
4521308	60	UST Thread		Pitch diameter	14	5.5 mm
4521309	60	UST Thread		Pitch diameter	16	5.5 mm
4521310	60	UST Thread		Pitch diameter	18	5.5 mm
4521311	60	UST Thread		Pitch diameter	19	5.5 mm
4521312	60	UST Thread		Pitch diameter	20	5.5 mm
4521313	60	UST Thread		Pitch diameter	22	5.5 mm
4521314	60	UST Thread		Pitch diameter	24	5.5 mm
4521315	60	UST Thread		Pitch diameter	28	5.5 mm
4521316	60	UST Thread		Pitch diameter	30	5.5 mm
4521317	60	UST Thread		Pitch diameter	32	5.5 mm
4521318	60	UST Thread		Pitch diameter	36	5.5 mm
4521319	60	UST Thread		Pitch diameter	40	5.5 mm

MULTIMAR 844 TMI MOUNTING ATTACHEMENT

• For outside (844 Tma) and inside diameters (844 Tmi)
• Stainless steel
• Lateral mm scale for easy positioning and adjustment of measuring limit stops
• Reversible measuring arms on measuring arm holders to increase the measuring range
• With ø 5 mm mounting bore for inserting interchangeable 844 Ta, 844 Ti, 844 Tb, 844 Tc, 844 Td, 844 Tz and 844 Tv measuring anvils

MULTIMAR 844 TE MEASURING ARMS

• For major and minor diameters
• Stainless steel
• Lateral mm scale for easy positioning and adjustment of measuring limit stops
• Reversible measuring arms on measuring arm holders to increase the measuring range
• 3.5 mm diameter holder for inserting interchangeable measuring anvils 844 Tp, 844 Ts, 844 Tk, 844 Tr and 844 Tg

Order no.	Throat depth in mm
4503024	25 mm
4503025	35 mm
4503026	70 mm
4503027	100 mm

MULTIMAR 844 TW DEPTH STOPS FOR 844 TMA, 844 TMI, 844 TE

• Stops with stall protected 3-point support
• Hardened stop pins
• Interchangeable and adjustable

Applications

• For adjustment of the measuring depth in horizontal measuring position
• Precise stops in one plane for repeatable measurements
• To be mounted on 844 Tma, 844 Tmi, 844 Te
• For easy setting of the measuring depth, a mm scale is engraved on the measuring arms 844 Tma, 844 Tmi and 844 Te
• For percise stetting of the measuring depth (i.e. for taper measurements) gage blocks can be used

MULTIMAR 844 TY HOLDER FOR MEASURING ROLLERS

• With location bolts for the measuring rollers 706 Vr Vr and provision for a stop and stop pin

Applications

• Determining the pitch diameter of outer threads

MULTIMAR 844 TF STAND

• User has both hands free for insertion of work piece
• The indicating instrument is always in the operator#92s line of vision
• Strong, stable cast base with clamping device for Universal Measuring Instrument

Applications

• For stationary use of the Universal Measuring Instrument 844 T Measuring range 25 – 110 mm

• With cylindrical holding shaft for fixing in 844 Tma / 844 Tmi mounting attachments
• Made of hardened steel
• The collar Ø D is ground precisely to dimension, the Ø D is set as the PRESET value for absolute measurements

Technical data

Order no.	Dimensions d in mm	Dimension D
4119010	1.5 mm	20 mm
4119011	9 mm	40 mm

Applications

• zum einfachen und direkten Messen von Bohrungsabständen

• For easy adaptation to individual measuring tasks, optional accessories include:
  – Interchangeable measuring arms
  – Contact blocks
  – Stop elements
• The movable measuring arm carrier is mounted on a high precision ball bearing guide for reduced play and friction
  – Results in high measuring sensitivity, accuracy and free movement
• Stable support elements for repeatable measurements
• Constant measuring force with integrated measuring force spring
• Reversible measuring force direction for outside and inside measurement
• Highly stable, precision ground, hard chrome plated guide tube
• Lightweight construction with core made from carbon fiber reinforced plastic (CRP) tube, for measuring range 1000-1500 mm
• The stationary measuring arm holder can be moved along the guide tube and clamped for coarse adjustment

Technical data

Order no.	Application range outside	Application range inside	Measuring force	Product weight
4503001	0 – 85	30 – 115	5 N	0.78 kg
4503002	80 – 235	110 – 265	5 N	1.01 kg
4503003	230 – 585	260 – 615	5 N	1.59 kg
4503004	580 – 985	610 – 1015	5 N	2.22 kg
4503005	970 – 1470	1000 – 1500	10 N	2.52 kg
4503006	1470 – 1970	1500 – 2000	10 N	2.68 kg
4503007	1970 – 2470	2000 – 2500	10 N	2.86 kg
4503008	2470 – 2970	2500 – 3000	10 N	3.26 kg
4503009	2970 – 3470	3000 – 3500	10 N	3.43 kg
4503010	3470 – 3970	3500 – 4000	10 N	3.62 kg
4503011	3970 – 4470	4000 – 4500	10 N	3.81 kg

Applications

• External and internal measurement of lengths, widths, diameters, distances
• External and internal threads
• Centering shoulders, narrow collars, recesses and grooves
• External and internal tapers
• External and internal gears
• etc.

• For easy adaptation to individual measuring tasks, optional accessories include:
  – Interchangeable measuring arms
  – Contact blocks
  – Stop elements
• The digital display is always in the operator’s line of vision due to the patented mounting fixture of the measuring elements provided on the upper and lower longitudinal face of the arm holders
• Application range can be extended by turning the measuring arms
• The two arm holders can be moved along the rail, providing a well-balanced weight distribution, even with small dimensions
• Hardened stainless steel slide and rail

Technical data

Order no.	Application range outside	Error limit (mm)
4119000	0 – 300	0.03 mm
4119001	0 – 600	0.03 mm
4119002	0 – 1000	0.04 mm
4119003	0 – 1250	0.04 mm

Applications

• For measuring:
• Outside and inside diameters
• Centering shoulders
• Narrow collars
• External and internal tapers
• Dovetails
• Grooves
• Distances between hole centers

Functions

• ON/OFF
• AUTO-ON / OFF
• RESET (set display to zero)
• mm/inch
• PRESET (for entering a numerical value)
• LOCK function (key lock)
• DATA (data transmission via connection cable)

• Maximum wear resistance due to carbide ball anvils
• Constant measuring force due to built-in spring, eliminating user influence
• Anvils, measuring heads, holder, spacer (intermediate piece) and depth extensions form a very comprehensive modular system which can rapidly be converted to measure further gear sizes
• When ordering please state the required ball diameter

Technical data

Order no.	Product type	Measuring range mm	Dimension over balls MdK	Repeatability fw (µm)	Error limit Ge (µm)
4485000	844 z1	23.5 – 26.5	26 – 130.5	1 µm	6 µm
4485001	844 z2	46 – 49	48.5 – 333	1 µm	6 µm