Measuring Instruments Archives - Page 39 of 82

Measuring head consists of a carbide tipped moving anvil and an interchangeable stationary anvil with a carbide ball
Transmission lever system transfers movement of movable anvil to indicating instrument
The broad centering bridge ensures automatic centering in the bore
Resistant to temperature because the shank and transfer rod are made of heat resistant Invar steel
Highly resistant to wear and tear because of carbide tipped moving anvil
Constant measuring force due to built-in spring, eliminating user influence
Universally applicable and extremely versatile
– Each instrument spans a broad measuring range
– Quick and easy to adjust to any size (within its range)
Invar steel has a particularly low expansion coefficient
– instrument totally insensitive to any kind of heat (including user body heat and increased ambient temperature)

Technical data

Order no.	Product type	Measuring range inches	Measuring range mm	Repeatability fw (µm)	Error limit Ge (µm)
4474179	844 NB	0.79 – 2″	20 – 50	1 µm	4 µm
4474180	844 NB	2 – 4.33″	50 – 110	1 µm	3 µm
4474186	844 NB	4.33 – 11.81″	110 – 300	1 µm	2.5 µm

MARAMETER 844 NR SELF-CENTERING DIAL BORE GAGE

Measuring head consists of a carbide tipped, movable measuring bolt and an opposing interchangeable stationary anvil with carbide ball
Stationary measuring bolt can pivot through 180°, giving rise to a very long return travel path of up to 40% of the measured bore
Movements of the measuring bolt are transmitted to the indicating instrument via the ring segment
The broad centering bridge ensures automatic centering in the bore
Resistant to temperature because the shaft and transfer rod are made of heat resistant Invar steel
Carbide tipped measuring contacts for high wear resistance
Constant measuring force thanks to built-in and independent measuring force spring preventing external interference
Universally applicable and extremely versatile
– Each instrument spans a broad measuring range
– Quick and easy to adjust to any size (within its range)
Invar steel has a particularly low expansion coefficient
– instrument totally insensitive to any kind of heat (including user body heat and increased ambient temperature)

Technical data

Order no.	Product type	Measuring range inches	Measuring range mm	Repeatability fw (µm)	Error limit Ge (µm)	Measuring depth mm
4474580	844 NR	2 – 2.8″	50 – 70	1 µm	2 µm	60 mm
4474590	844 NR	2.4 – 4″	60 – 100	1 µm	2 µm	60 mm
4474600	844 NR	3.2 – 6″	80 – 150	1 µm	2 µm	95 mm
4474610	844 NR	4.7 – 8.7″	120 – 220	1 µm	2 µm	107 mm
4474620	844 NR	7.1 – 14.2″	180 – 360	1.5 µm	3 µm	148 mm
4474630	844 NR	11.4 – 20.7″	290 – 530	1.5 µm	3 µm	170 mm

Measuring head consists of a carbide tipped moving anvil and an interchangeable stationary anvil with a carbide ball
Transmission lever system transfers movement of movable anvil to indicating instrument
The broad centering bridge ensures automatic centering in the bore
Resistant to temperature bacause the shank and transfer rod are made of heat resistant Invar steel
Highly resistant to wear and tear due to the carbide tipped moving anvil
Constant measuring force because of built-in spring, eliminating user influence
Universally applicable and extremely versatile
– Each instrument spans a broad measuring range
– Quick and easy to adjust to any size (within its range)
Extensive modular system is composed of measuring head, holder, extensions, right angle attachments and depth stops
Invar steel has a particularly low expansion coefficient
– instrument totally insensitive to any kind of heat (including user body heat and increased ambient temperature)

Technical data

Order no.	Product type	Measuring range inches	Measuring range mm	Distance of movable anvil_mm	Repeatability fw (µm)	Error limit Ge (µm)	Measuring depth mm
4475000	844 NH	.7 – 2″	18 – 50	1.3 mm	0.5 µm	2 µm	115 mm
4475001	844 NH	1.4 – 4″	35 – 100	1.3 mm	0.5 µm	2 µm	148 mm
4475002	844 NH	4 – 10″	100 – 250	1.6 mm	0.5 µm	2 µm	230 mm
4475003	844 NH	10 – 16″	250 – 400	2.6 mm	1.5 µm	3 µm	336 mm
4475004	844 NH	16 – 32″	400 – 800	2.6 mm	1.5 µm	3 µm	336 mm
4475005	844 NH	10 – 32″	250 – 800	2.6 mm	1.5 µm	3 µm	336 mm

MARAMETER 844 N SELF-CENTRING DIAL BORE GAGE

Measuring head consists of a carbide tipped moving anvil and an interchangeable stationary anvil with a hardened steel ball
Transmission lever system transfers movement of movable anvil to indicating instrument
The broad centering bridge ensures automatic centering in the bore
Resistant to temperature because the shank and transfer rod are made of heat resistant Invar steel
Highly resistant to wear and tear because of carbide tipped moving anvil
Constant measuring force due to built-in spring, eliminating user influence
Universally applicable and extremely versatile
– Each instrument spans a broad measuring range
– Quick and easy to adjust to any size (within its range)
Extensive modular system is composed of measuring head, holder, extensions, right angle attachments and depth stops
Invar steel has a particularly low expansion coefficient
– instrument totally insensitive to any kind of heat (including user body heat and increased ambient temperature)

Technical data of Centring dial bore gage

Order no.	Product type	Measuring range inches	Measuring range mm	Distance of movable anvil_mm	Repeatability fw (µm)	Error limit Ge (µm)	Measuring depth mm
4474000	844 N	.7 – 2″	18 – 50	1.3 mm	0.5 µm	2 µm	115 mm
4474001	844 N	1.4 – 4″	35 – 100	1.3 mm	0.5 µm	2 µm	148 mm
4474002	844 N	4 – 10″	100 – 250	1.6 mm	0.5 µm	2 µm	230 mm
4474003	844 N	10 – 16″	250 – 400	2.6 mm	1.5 µm	3 µm	366 mm
4474004	844 N	16 – 32″	400 – 800	2.6 mm	1.5 µm	3 µm	366 mm
4474005	844 N	10 – 32″	250 – 800	2.6 mm	1.5 µm	3 µm	366 mm

Maximum wear resistance due to hard chrome plating
Constant measuring force as a result of built-in spring, eliminating user influence
Highly versatile
– Each gage covers a broad range
– Quickly and easily adjustable to any size and type of measuring application (within the limits)
Extensive modular system is composed of measuring probe, holder, depth extensions, right angle attachments and depth stops

Technical data

Order no.	Nominal size mm	Product type	Measuring range mm	Number of measuring probes	Repeatability fw (µm)
4470000	0,50 0,55 0,60 0,70 0,80 0,90	844 K	0.47 – 0.97	6 Stück	1 µm
4470001	1,00 1,10 1,20 1,30 1,40	844 K	0.95 – 1.55	5 Stück	1 µm
4470002	1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50 3,75 4,00	844 K	1.5 – 4.2	10 Stück	1 µm
4470003	4,00 4,50 5,00 5,50 6,00 6,50 7,00	844 K	3.7 – 7.3	7 Stück	1 µm
4470004	7,50 8,00 8,50 9,00 9,50 10,00	844 K	6.7 – 10.3	7 Stück	1 µm
4470005	10,00 11,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00	844 K	9.4 – 18.6	9 Stück	1 µm

MARAMETER 844 KH SELF-CENTRING DIAL BORE GAGE

Maximum wear resistance due to carbide tipped faces
Constant measuring force as a result of built-in spring, eliminating user influence
Highly versatile
– Each gage covers a broad range
– Quickly and easily adjustable to any size and type of measuring application (within the limits)
Extensive modular system is composed of measuring probe, holder, depth extensions, right angle attachments and depth stops

Technical data

Order no.	Nominal size mm	Product type	Measuring range mm	Number of measuring probes	Repeatability fw (µm)
4471002	1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50 3,75 4,00	844 KH	1.5 – 4.2	10 Stück	1 µm
4471003	4,00 4,50 5,00 5,50 6,00 6,50 7,00	844 KH	3.7 – 7.3	7 Stück	1 µm
4471004	7,50 8,00 8,50 9,00 9,50 10,00	844 KH	6.7 – 10.3	7 Stück	1 µm
4471005	10,00 11,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00	844 KH	9.4 – 18.6	9 Stück	1 µm

MARAMETER 844 KS SELF-CENTRING DIAL BORE GAGE

Maximum wear resistance due to hard chrome plating
Constant measuring force as a result of built-in spring, thus eliminating user influence
Highly versatile
– Each gage covers a broad range
– Quickly and easily adjustable to any size and type of measuring application (within the limits)
Extensive modular system is composed of measuring probe, holder, depth extensions, right angle attachments and depth stops

Technical data

Order no.	Nominal size mm	Product type	Measuring range mm	Number of measuring probes	Repeatability fw (µm)
4482163	1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50 3,75 4,00	844 KS	1.5 – 4.2	10 Stück	1 µm
4482164	4,00 4,50 5,00 5,50 6,00 6,50 7,00	844 KS	3.7 – 7.3	7 Stück	1 µm
4482165	7,50 8,00 8,50 9,00 9,50 10,00	844 KS	6.7 – 10.3	7 Stück	1 µm
4482166	10,00 11,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00	844 KS	9.4 – 18.6	9 Stück	1 µm

MICROMAR 44 AK MEASURING HEAD

Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight

Technical data

Order no.	Measuring range mm	Measuring range inches
4190330	6 – 8	.25 – .3125″
4190331	8 – 10	.3125 – .4″
4190332	10 – 12	.4 – .4725″
4190333	12 – 16	.4725 – .625″
4190334	16 – 20	.625 – .775″
4190335	20 – 25	.775 – 1″
4190336	25 – 30	1 – 1.2″
4190337	30 – 40	1.2 – 1.6″
4190339	40 – 50	1.6 – 2″
4190340	50 – 60	2 – 2.35″
4190341	60 – 70	2.35 – 2.75″
4190042	70 – 85	2.75 – 3.35″
4190043	85 – 100	3.35 – 4″
4190044	100 – 125	4 – 4.9″
4190045	125 – 150	4.9 – 5.9″
4190046	150 – 175	5.9 – 6.9″
4190047	175 – 200	6.9 – 7.9″

MICROMAR 44 EWG BASIC UNIT

Threaded connection for changing the measuring head

Digimatic
Opto RS232C
USB
Battery life approx. 2 years
IP 52
instruction manual
battery
case

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch
4190106	6 – 20	.25 – .775″	0.001 / .00005″
4190107	20 – 100	.775 – 4.0″	0.001 / .00005″
4190108	100 – 200	4.0 – 7.9″	0.001 / .00005″

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
PRESET (for entering a numerical value)
mm/inch
LOCK function (key lock)
DATA (data transmission via connection cable)

MICROMAR 844 AG BASIC INSTRUMENT MEASURING PISTOL

Threaded connection for changing the measuring head
Any indicating instrument with an 8 mm mounting shank can be used
instruction manual
case

Technical data

Order no.	Measuring range mm	Measuring range inches
4487633	20 – 100	.775 – 4.0″
4487634	100 – 200	4.0 – 7.9″
4487635	6 – 100	.25 – 4.0″

MICROMAR 844 A SELF-CENTERING INSIDE MEASURING PISTOL

Threaded connection for changing the measuring head
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight
excludes indicator
basic units 844 Ag
measuring head 44 Ak
instruction manual
case

Technical data

Order no.	Measuring range mm	Measuring range inches	Error limit µm	Notes error limit
4487700	6 – 8	.25 – .3125″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487701	8 – 10	.3125 – .4″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487702	10 – 12	.4 – .4725″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487703	12 – 16	.4725 – .625″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487704	16 – 20	.625 – .775″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487705	20 – 25	.775 – 1″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487706	25 – 30	1 – 1.2″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487707	30 – 40	1.2 – 1.6″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487709	40 – 50	1.6 – 2″	3 µm	Over the full length of the anvils Indicator is not taken into consideration
4487710	50 – 60	2 – 2.35″	4 µm	Over the full length of the anvils Indicator is not taken into consideration
4487711	60 – 70	2.35 – 2.75″	4 µm	Over the full length of the anvils Indicator is not taken into consideration
4487612	70 – 85	2.75 – 3.35″	4 µm	Over the full length of the anvils Indicator is not taken into consideration
4487613	85 – 100	3.35 – 4″	4 µm	Over the full length of the anvils Indicator is not taken into consideration
4487614	100 – 125	4 – 4.9″	5 µm	Over the full length of the anvils Indicator is not taken into consideration
4487615	125 – 150	4.9 – 5.9″	5 µm	Over the full length of the anvils Indicator is not taken into consideration
4487616	150 – 175	5.9 – 6.9″	6 µm	Over the full length of the anvils Indicator is not taken into consideration
4487617	175 – 200	6.9 – 7.9″	6 µm	Over the full length of the anvils Indicator is not taken into consideration

MICROMAR 844 AS SELF-CENTERING MEASURING PISTOL

Threaded connection for changing the measuring head
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight
instruction manual
setting rings
key for replacing measuring heads (from 30 mm)

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Notes error limit
4487750	6 – 12	.25 – .4725″		Over the full length of the anvils Indicator is not taken into consideration
4487751	12 – 20	.4725 – .775″		Over the full length of the anvils Indicator is not taken into consideration
4487752	20 – 50	.775 – 2″		Over the full length of the anvils Indicator is not taken into consideration
4487753	50 – 100	2 – 4″		Over the full length of the anvils Indicator is not taken into consideration
4487760	6 – 12	.25 – .4725″	0.0005 / .00002″	Over the full length of the anvils Indicator is not taken into consideration
4487761	12 – 20	.4725 – .775″	0.0005 / .00002″	Over the full length of the anvils Indicator is not taken into consideration
4487762	20 – 50	.775 – 2″	0.0005 / .00002″	Over the full length of the anvils Indicator is not taken into consideration
4487763	50 – 100	2 – 4″	0.0005 / .00002″	Over the full length of the anvils Indicator is not taken into consideration

MICROMAR 44 EWR DIGITAL SELF-CENTERING INSIDE MICROMETER

Threaded connection for changing the measuring head
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight
Digimatic
Opto RS232C
USB
Battery life approx. 2 years
IP 52
basic units 44 EWg
measuring head 44 Ak
instruction manual
batter
case
8.5 mm

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Notes error limit
4191120	6 – 8	.25 – .3125″	0.001 / .00005″	4 µm	over the full length of the anvils
4191121	8 – 10	.3125 – .4″	0.001 / .00005″	4 µm	over the full length of the anvils
4191122	10 – 12	.4 – .4725″	0.001 / .00005″	4 µm	over the full length of the anvils
4191123	12 – 16	.4725 – .625″	0.001 / .00005″	4 µm	over the full length of the anvils
4191124	16 – 20	.625 – .775″	0.001 / .00005″	4 µm	over the full length of the anvils
4191125	20 – 25	.775 – 1″	0.001 / .00005″	4 µm	over the full length of the anvils
4191126	25 – 30	1 – 1.2″	0.001 / .00005″	4 µm	over the full length of the anvils
4191127	30 – 40	1.2 – 1.6″	0.001 / .00005″	4 µm	over the full length of the anvils
4191129	40 – 50	1.6 – 2″	0.001 / .00005″	4 µm	over the full length of the anvils
4191130	50 – 60	2 – 2.35″	0.001 / .00005″	5 µm	over the full length of the anvils
4191131	60 – 70	2.35 – 2.75″	0.001 / .00005″	5 µm	over the full length of the anvils
4191032	70 – 85	2.75 – 3.35″	0.001 / .00005″	5 µm	over the full length of the anvils
4191033	85 – 100	3.35 – 4″	0.001 / .00005″	5 µm	over the full length of the anvils
4191034	100 – 125	4 – 4.9″	0.001 / .00005″	6 µm	over the full length of the anvils
4191035	125 – 150	4.9 – 5.9″	0.001 / .00005″	6 µm	over the full length of the anvils
4191036	150 – 175	5.9 – 6.9″	0.001 / .00005″	7 µm	over the full length of the anvils
4191037	175 – 200	6.9 – 7.9″	0.001 / .00005″	7 µm	over the full length of the anvils

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)
LOCK function (key lock)

MICROMAR 44 EWR DIGITAL SELF-CENTERING INSIDE MICROMETER SETS

Threaded connection for changing the measuring head
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight
Digimatic
Opto RS232C
USB
Battery life approx. 2 years
IP 52
basic units 44 EWg
measuring heads 44 Ak
setting rings
battery
instruction manual
case
8.5 mm

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Notes error limit
4191160	6 – 12	.25 – .4725″	0.001 / .00005″	4 µm	over the full length of the anvils
4191161	12 – 20	.4725 – .775″	0.001 / .00005″	4 µm	over the full length of the anvils
4191162	20 – 50	.775 – 2″	0.001 / .00005″	4 µm	over the full length of the anvils
4191163	50 – 100	2 – 4″	0.001 / .00005″	5 µm	over the full length of the anvils

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
PRESET (for entering a numerical value)
mm/inch
LOCK function (key lock)
DATA (data transmission via connection cable)

MICROMAR 44 AS SELF-CENTERING INSIDE MICROMETER SET

Operating and display units with satin chrome finish
Stainless spindle is hardened throughout and ground
Rapid drive with integrated ratchet
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight
instruction manual
setting rings
key for replacing measuring heads (from 30 mm)
allen key
case

Technical data

Order no.	Measuring range mm	Graduation value mm	Error limit µm	Notes error limit
4190350	6 – 12	0,001	4 µm	over the full length of the anvils
4190351	12 – 20	0,001	4 µm	over the full length of the anvils
4190352	20 – 50	0,005	4 µm	over the full length of the anvils
4190353	50 – 100	0,005	5 µm	over the full length of the anvils

MICROMAR 44 A SELF-CENTERING INSIDE MICROMETER

Operating and display units with satin chrome finish
Stainless spindle is hardened throughout and ground
Rapid drive with integrated ratchet
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
Anvils from 12 mm are carbide tipped
From 12 mm the anvils can be used to measure the bottom of a bore
From 40 mm all measuring heads are made from aluminium to reduce weight
instruction manual
allen key
key for replacing measuring heads (from 30 mm)
case

Technical data

Order no.	Measuring range mm	Graduation value mm	Error limit µm	Notes error limit	Spindle thread pitch_mm
4190310	6 – 8	0,001	4 µm	over the full length of the anvils	0.5 mm
4190311	8 – 10	0,001	4 µm	over the full length of the anvils	0.5 mm
4190312	10 – 12	0,001	4 µm	over the full length of the anvils	0.5 mm
4190313	12 – 16	0,001	4 µm	over the full length of the anvils	0.5 mm
4190314	16 – 20	0,001	4 µm	over the full length of the anvils	0.5 mm
4190315	20 – 25	0,005	4 µm	over the full length of the anvils	0.5 mm
4190316	25 – 30	0,005	4 µm	over the full length of the anvils	0.5 mm
4190317	30 – 40	0,005	4 µm	over the full length of the anvils	0.5 mm
4190319	40 – 50	0,005	4 µm	over the full length of the anvils	0.5 mm
4190320	50 – 60	0,005	5 µm	over the full length of the anvils	0.5 mm
4190321	60 – 70	0,005	5 µm	over the full length of the anvils	0.5 mm
4190012	70 – 85	0,005	5 µm	over the full length of the anvils	0.5 mm
4190013	85 – 100	0,005	5 µm	over the full length of the anvils	0.5 mm
4190014	100 – 125	0,005	6 µm	over the full length of the anvils	0.5 mm
4190015	125 – 150	0,005	6 µm	over the full length of the anvils	0.5 mm
4190016	150 – 175	0,005	7 µm	over the full length of the anvils	0.5 mm
4190017	175 – 200	0,005	7 µm	over the full length of the anvils	0.5 mm

MARAMETER 49P-2M GAGE FOR EXTERNAL MEASUREMENT

Generous clearance on jaws reaches over non-measured part protrusions for easy access to areas where thickness must meet critical dimensional specs
Retraction lever is conveniently located for one hand operation
0.02 mm or 0.1 mm / .01“, .001“, or 1/64“ grads. available
Continuous reading dials with revolution counters normally provided
Cylindrical radius steel contact tips normally furnished

Technical data

Order no.	Product type	Measuring range mm	Throat depth mm	Graduation value mm	Measuring force (N)	Measuring depth mm	Mounting hole for indicator
2050704	49P-17M	0 – 50	100 mm	0.02 mm	–	100 mm	0.375 inch
2050709	49P-19M	0 – 50	200 mm	0.02 mm	–	200 mm	0.375 inch
2050710	49P-1M	0 – 75	100 mm	0.1 mm	–	100 mm	0.375 inch
2050718	49P-2M	0 – 75	200 mm	0.1 mm	–	200 mm	0.375 inch

MARAMETER 49P-2 GAGE FOR EXTERNAL MEASUREMENT

Generous clearance on jaws reaches over non-measured part protrusions for easy access to areas where thickness must meet critical dimensional specs
Retraction lever is conveniently located for one hand operation
0.02 mm or 0.1 mm / .01“, .001“, or 1/64“ grads. available
Continuous reading dials with revolution counters normally provided
Cylindrical radius steel contact tips normally furnished

Technical data

Order no.	Product type	Measuring range inches	Throat depth inch	Graduation value inch	Measuring force (N)	Mounting hole for indicator
2050696	49P-1	0 – 3″	4 inch	.01″	–	0.375 inch
2050702	49P-17	0 – 2″	4 inch	.001″	–	0.375 inch
2050706	49P-19	0 – 2″	8 inch	.001″	–	0.375 inch
2050711	49P-2	0 – 3″	8 inch	.01″	–	0.375 inch

High contrast analog and digital LCD
Tolerance displayed with 2 LEDs

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Repeatability mm	Error limit (mm)	Measuring force (N)	Measuring depth mm	Measuring contact ball diameter mm	Length of moving measuring contact	Length of fixed measuring contact
4495560	838 EA	0 – 10	0.005 mm	0.005 mm	0.015 mm	0.8 – 1.2	35 mm	1.5 mm	19.1 mm	18.6 mm
4495561	838 EA	0 – 20	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1.5 mm	24.6 mm	24.6 mm
4495562	838 EA	0 – 20	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1.5 mm	24.6 mm	2.5 mm
4495563	838 EA	0 – 30	0.02 mm	0.02 mm	0.04 mm	0.9 – 1.6	116 mm	3 mm	30 mm	30 mm
4495564	838 EA	0 – 50	0.02 mm	0.04 mm	0.06 mm	0.8 – 1.7	167 mm	3 mm	30 mm	30 mm
4495565	838 EA	0 – 30	0.02 mm	0.02 mm	0.04 mm	0.9 – 1.6	116 mm	3 mm	30 mm	4 mm
4495566	838 EA	0 – 50	0.02 mm	0.04 mm	0.06 mm	0.8 – 1.7	169 mm	3 mm	30 mm	4.3 mm

Functions

ON/OFF
mm/inch
TOL (enter tolerance limit values)
ABS (display can be set to zero without losing reference to preset)
DATA (data transmission via connection cable)

Contact points made of carbide
Absolute measuring instrument
Easy-to-read tolerance markers

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Repeatability mm	Error limit (mm)	Measuring force (N)	Measuring depth mm	Measuring contact ball diameter mm	Length of moving measuring contact	Groove depth	Groove width	Length of fixed measuring contact
4495580	838 TI	5 – 15	0.005 mm	0.005 mm	0.015 mm	0.8 – 1.2	35 mm	0.6 mm	2.5 mm	2.3 mm	0.8 mm	2.5 mm
4495581	838 TI	10 – 30	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	5.4 mm	5.2 mm	1.2 mm	5.4 mm
4495582	838 TI	20 – 40	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	7.3 mm	7 mm	1.2 mm	7.3 mm
4495583	838 TI	30 – 50	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	7.3 mm	7 mm	1.2 mm	7.3 mm
4495584	838 TI	40 – 60	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	12.2 mm	8.3 mm	1.2 mm	12.2 mm
4495585	838 TI	50 – 70	0.01 mm	0.01 mm	0.03 mm	1.1 – 1.6	85 mm	1 mm	12.2 mm	8.3 mm	1.2 mm	12.2 mm
4495586	838 TI	15 – 65	0.05 mm	0.025 mm	0.05 mm	0.9 – 1.9	188 mm	1.5 mm	6 mm	5.5 mm	1.9 mm	6 mm
4495587	838 TI	40 – 90	0.05 mm	0.025 mm	0.05 mm	0.9 – 1.9	192 mm	2 mm	8.5 mm	8.3 mm	2.4 mm	8.5 mm