Measuring Instruments Archives - Page 43 of 82

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Self contained movement, which is quick and easy to remove and replace
Box type protective housing
Constant measuring force
Adjustable limit contacts made from high grade precious metal
Limit contacts are particularly well protected against vibration and mechanical overload

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color	IP protection category	Maximum switching capacity	Maximum switching voltage	Maximum switching current	Switching accuracy with non-inductive load of 10 mA/24 V
4343100	1110 N	±0.25	0.01 mm	25-0-25	6.5 µm	12 µm	5 µm	3.5 µm	3.5 µm	Factory standard	2 N	50 mm	white		240 mW	24 V	100 mA	1.5 µm
4343105	1110 NT	±0.25	0.01 mm	25-0-25	6.5 µm	12 µm	5 µm	3.5 µm	3.5 µm	Factory standard	2 N	50 mm	white	IP 54	240 mW	24 V	100 mA	1.5 µm

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range inch	Graduation value inch	Type of dial face	Error limit Ge in inches (text)	Error limit Gges in inches (text)	Error limit Gt in inches (text)	Standard	Measuring force	Scale diameter	Dial color	IP protection category
4335900	1002 Z	± .0010″	0 inch	.001″-0-.001″	.00002″	.00003″	.000014″	Factory standard	1 N	50 mm	white
4335905	1002 ZT	± .0010″	0 inch	.001″-0-.001″	.00002″	.00003″	.000014″	Factory standard	1 N	50 mm	white	IP 54
4334900	1003 Z	± .0020″	0 inch	.002″-0-.002″	.00005″	.00006″	.000035″	Factory standard	1 N	50 mm	white
4334905	1003 ZT	± .0020″	0 inch	.002″-0-.002″	.00005″	.00006″	.000035″	Factory standard	1 N	50 mm	white	IP 54
4333900	1004 Z	± .0050″	0 inch	.005″-0-.005″	.0001″	.00012″	.00005″	Factory standard	1 N	50 mm	white
4333905	1004 ZT	± .0050″	0 inch	.005″-0-.005″	.0001″	.00012″	.00005″	Factory standard	1 N	50 mm	white	IP 54
4332900	1010 Z	± .0100″	0.001 inch	.01″-0-.01″	.00035″	.0004″	.00025″	Factory standard	1 N	50 mm	white
4332905	1010 ZT	± .0100″	0.001 inch	.01″-0-.01″	.00035″	.0004″	.00025″	Factory standard	1 N	50 mm	white	IP 54

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range mm	Graduation value mm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color	IP protection category
4332000	1010	±0.25	0.01 mm	25-0-25	7 µm	8 µm	4 µm	2 µm	2 µm	Factory standard	1 N	50 mm	white
4332005	1010 T	±0.25	0.01 mm	25-0-25	7 µm	8 µm	4 µm	2 µm	2 µm	Factory standard	1 N	50 mm	white	IP 54
4330000	1050	±1.5	0.05 mm	15-0-15	35 µm	40 µm	24 µm	10 µm	10 µm	Factory standard	1 N	50 mm	white
4330005	1050 T	±1.5	0.05 mm	15-0-15	35 µm	40 µm	24 µm	10 µm	10 µm	Factory standard	1 N	50 mm	white

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range µm	Graduation value µm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4334010	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	Factory standard	2 N	50 mm	yellow
4334011	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	Factory standard	3 N	50 mm	yellow
4334050	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	0.5 N	50 mm	yellow
4334070	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	0.4 N	50 mm	yellow
4334071	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	0.7 N	50 mm	yellow
4334075	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	0.3 N	50 mm	yellow
4334076	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	0.6 N	50 mm	yellow

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range µm	Graduation value µm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color
4338100	1000 A	± 120	1 µm	120-0-120	1.5 µm	2 µm	0.7 µm	1 µm	0.5 µm	Factory standard	3.5 N	110 mm	yellow
4339100	1000 B	± 50	1 µm	50-0-50	1.5 µm	2 µm	0.7 µm	1 µm	0.5 µm	Factory standard	3.5 N	110 mm	yellow

Large, high contrast dial face
Adjustable tolerance markers
Lockable fine adjustment screw
Shockproof movement
Mounting shank and measuring spindle are both made of hardened stainless steel
Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
Resistant to lateral forces (side play) acting on the measuring spindle
Maximum sensitivity and accuracy are ensured by the jeweled movement in conjunction with the precision gears and pinions
Box type protective housing
Constant measuring force
Measuring spindle can be retracted with either a screw in cable release or with a lifting knob

Technical data

Order no.	Product type	Measuring range µm	Graduation value µm	Type of dial face	Error limit Ge (µm)	Error limit Gges (µm)	Error limit Gt (µm)	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Measuring force	Scale diameter	Dial color	IP protection category
4335000	1002	± 25	0.5 µm	25-0-25	0.5 µm	0.6 µm	0.4 µm	0.3 µm	0.3 µm	Factory standard	1 N	50 mm	yellow
4335005	1002 T	± 25	0.5 µm	25-0-25	0.5 µm	0.6 µm	0.4 µm	0.3 µm	0.3 µm	Factory standard	1 N	50 mm	yellow	IP 54
4334000	1003	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	1 N	50 mm	yellow
4334005	1003 T	± 50	1 µm	50-0-50	1 µm	1.2 µm	0.7 µm	0.5 µm	0.5 µm	DIN 879-1	1 N	50 mm	yellow	IP 54
4334001	1003 XL	± 130	2 µm	130-0-130	2 µm	2.4 µm	1.4 µm	1 µm	1 µm	Factory standard	1 N	50 mm	yellow
4334006	1003 XLT	± 130	2 µm	130-0-130	2 µm	2.4 µm	1.4 µm	1 µm	1 µm	Factory standard	1 N	50 mm	yellow	IP 54
4333000	1004	± 130	5 µm	130-0-130	3.5 µm	4 µm	3 µm	1 µm	1 µm	Factory standard	1 N	50 mm	white
4333005	1004 T	± 130	5 µm	130-0-130	3.5 µm	4 µm	3 µm	1 µm	1 µm	Factory standard	1 N	50 mm	white	IP 54

MARCATOR WC7I DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Normally furnished: continuous clockwise dial with revolution counter; BK-63 centered vertical lug back; regular contact point, .18” radiused, .625” long
Optional Dials: continuous counterclockwise with revolution counter; balanced outer dial with + on right or left. Order by dial type and specify dial style desired
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Dial color
2014655	W22I	.025″	.0001”	0-10	.010″	± .0001″	ANSI	green
2014663	WC3K	.050″	.00025″	0-20	.020″	± .00025″	ANSI	green
2014665	WC3Q	.050″	.0005″	0-20	.020″	± .0005″	ANSI	green
2014667	WC5M	.075″	.0005″	0-30	.030″	± .0005″	ANSI	green
2014669	WC6K	.100″	.0005″	0-40	.040″	± .0005″	ANSI	green
2014671	WC7I	.125″	.0005″	0-50	.050″	± .0005″	ANSI	green
2014673	WC8I	.250″	.001″	0-100	.100″	± .001″	ANSI	green
2014675	WC8IS	1.000″	.001″	0-100	.100″	± .001″	ANSI	green

MARCATOR WP6I DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Normally furnished: continuous clockwise dial with revolution counter; BK-63 centered vertical lug back; regular contact point, .18” radiused, .625” long
Optional Dials: continuous counterclockwise with revolution counter; balanced outer dial with + on right or left. Order by dial type and specify dial style desired
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Dial color
2014679	WP1I	0.5 mm	0.002 mm	0-20	0.2 mm	ANSI	yellow
2014681	WP3I	1.25 mm	0.005 mm	0-50	0.5 mm	ANSI	yellow
2014683	WP6I	2.5 mm	0.01 mm	0-100	1 mm	ANSI	yellow

MARCATOR W8I PERPENDICULAR DIAL INDICATORS

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no-shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Normally furnished: balanced dial with + on right; mounting rod (see dimension drawings); regular contact point, .18” radiused, .250” long
Threaded stem versions available as an option; AD-59 (.5622 long x .500” OD for “J & W” styles), 3/8-32 internally threaded bushings and AD-60 (.687” long x .500” OD for “G & F” Models) purchased separately (bushings also available separately)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Scale diameter	Dial color
2011344	I8I	2.5 mm	0.025 mm	0-125-0	2.5 mm	ANSI	43 mm	yellow
2014653	W1I	0.2 mm	0.002 mm	0-10-0	0.2 mm	ANSI	57 mm	yellow
2014657	W6I	1 mm	0.01 mm	0-50-0	1 mm	ANSI	57 mm	yellow
2014659	W8I	2.5 mm	0.025 mm	0-125-0	2.5 mm	ANSI	57 mm	yellow

MARCATOR J8I PERPENDICULAR DIAL INDICATORS

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no-shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Normally furnished: balanced dial with + on right; mounting rod (see dimension drawings); regular contact point, .18” radiused, .250” long
Threaded stem versions available as an option; AD-59 (.5622 long x .500” OD for “J & W” styles), 3/8-32 internally threaded bushings and AD-60 (.687” long x .500” OD for “G & F” Models) purchased separately (bushings also available separately)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Scale diameter (inches)	Dial color
2011330	F8I	.200″	.001″	0-50-0	.100″	± .001″	ANSI	1,72″	green
2011332	G4O	.100″	.0005″	0-12-0	.025″	± .0005″	ANSI	2,25″	green
2011334	G8I	.200″	.001″	0-50-0	.100″	± .001″	ANSI	2,25″	green
2011713	J1K	.008″	.0001”	0-4-0	.008″	± .0001″	ANSI	2,25″	green
2011715	J6K	.040″	.0005″	0-20-0	.040″	± .0005″	ANSI	2,25″	green
2011717	J8I	.100″	.001″	0-50-0	.100″	± .001″	ANSI	2,25″	green
2011718	J8I-X	.100″	.0001”	0-50-0	.100″		ANSI		green
2012411	V8I	.100″	.001″	0-50-0	.100″	± .001″	ANSI	1,69″	green

MARCATOR 28IQN DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Normally furnished: continuous clockwise dial; centered vertical lug back; regular contact point, .18” radiused, .250” long
Long Range Models: include (1) revolution counter (except C9I without revolution counter). Extra Long Range Models: include (2) revolution counters
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Scale diameter (inches)	Dial color
2011064	42IQ	.500″	.0001”	0-10	.010″	± .0001″ for first 2 1/2 rev. only	ANSI	3.625″	green
2011270	D8IS	1.000″	.001″	0-100	.100″	± .001″	ANSI	2.75″	green
2011272	D8IT	2.000″	.001″	0-100	.100″	± .001″ for first 1″ of travel	ANSI	2.75″	green
2011318	E8IU	3.000″	.001″	0-100	.100″	± .001″ for first 1″ of travel	ANSI	3.625″	green
2014698	28ISN	1.000″	.001″	0-100	.100″	± .001″	ANSI	2.25″	green
2014699	28IQN	.500″	.001″	0-100	.100″	± .001″	ANSI	2.25″	green
2014816	29I	1.000″	.01″	0-1000	1.000″	± .010″	ANSI	2.25″	green

MARCATOR SQ6IS DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Normally furnished: continuous clockwise dial; centered vertical lug back; regular contact point, .18” radiused, .250” long
Long Range Models: include (1) revolution counter (except C9I without revolution counter). Extra Long Range Models: include (2) revolution counters
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Scale diameter	Dial color
2011883	Q8IT	50 mm	0.025 mm	0-25	2.5 mm	ANSI	70 mm	yellow
2012363	R8IU	75 mm	0.025 mm	0-25	2.5 mm	ANSI	92 mm	yellow
2012381	SP6IS	25 mm	0.01 mm	0-100	1 mm	ANSI	57 mm	yellow
2012384	SQ6IS	25 mm	0.01 mm	0-100	1 mm	ANSI	70 mm	yellow

MARCATOR E7I DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Scale diameter (inches)	Dial color
2011060	42I	.025″	.0001”	0-5-0	.010″	± .0001″	ANSI	3.625″	green
2011061	42I-RC	.025″	.0001”	0-10	.010″	± .0001″	ANSI	3.625″	green
2011280	E1K	.020″	.0001”	0-4-0	.008″	± .0001″	ANSI	3.625″	green
2011281	E1K-RC	.020″	.0001”	0-8	.008″	± .0001″	ANSI	3.625″	green
2011286	E3K	.050″	.00025″	0-10-0	.020″	± .00025″	ANSI	3.625″	green
2011287	E3K-RC	.050″	.00025″	0-20	.020″	± .00025″	ANSI	3.625″	green
2011290	E3Q	.050″	.0005″	0-10-0	.020″	± .0005″	ANSI	3.625″	green
2011291	E3Q-RC	.050″	.0005″	0-20	.020″	± .0005″	ANSI	3.625″	green
2011294	E3W	.050″	.001″	0-10-0	.020″	± .001″	ANSI	3.625″	green
2011295	E3W-RC	.050″	.001″	0-20	.020″	± .001″	ANSI	3.625″	green
2011298	E5G	.075″	.00025″	0-15-0	.030″	± .00025″	ANSI	3.625″	green
2011299	E5G-RC	.075″	.00025″	0-30	.030″	± .00025″	ANSI	3.625″	green
2011302	E5M	.075″	.0005″	0-15-0	.030″	± .0005″	ANSI	3.625″	green
2011303	E5M-RC	.075″	.0005″	0-30	.030″	± .0005″	ANSI	3.625″	green
2011306	E7I	.125″	.0005″	0-25-0	.050″	± .0005″	ANSI	3.625″	green
2011307	E7I-RC	.125″	.0005″	0-50	.050″	± .0005″	ANSI	3.625″	green
2011310	E7O	.125″	.001″	0-25-0	.050″	± .001″	ANSI	3.625″	green
2011311	E7O-RC	.125″	.001″	0-50	.050″	± .001″	ANSI	3.625″	green
2011314	E8I	.250″	.001″	0-50-0	.100″	± .001″	ANSI	3.625″	green
2011315	E8I-RC	.250″	.001″	0-100	.100″	± .001″	ANSI	3.625″	green

MARCATOR R6I-RC DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Scale diameter	Dial color
2012347	R1I	0.5 mm	0.002 mm	0-10-0	0.2 mm	ANSI	92 mm	yellow
2012348	R1I-RC	0.5 mm	0.002 mm	0-20	0.2 mm	ANSI	92 mm	yellow
2012351	R3I	1.25 mm	0.005 mm	0-25-0	0.5 mm	ANSI	92 mm	yellow
2012352	R3I-RC	1.25 mm	0.005 mm	0-50	0.5 mm	ANSI	92 mm	yellow
2012355	R6I	2.5 mm	0.01 mm	0-50-0	1 mm	ANSI	92 mm	yellow
2012356	R6I-RC	2.5 mm	0.01 mm	0-100	1 mm	ANSI	92 mm	yellow
2012359	R8I	5 mm	0.02 mm	0-100-0	2 mm	ANSI	92 mm	yellow
2012360	R8I-RC	5 mm	0.02 mm	0-200	2 mm	ANSI	92 mm	yellow