Measuring Instruments Archives - Page 44 of 82

MARCATOR D6K-RC DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Scale diameter (inches)	Dial color
2011050	32I	.025″	.0001”	0-5-0	.010″	±.0001″	ANSI	2.75″	green
2011051	32I-RC	.025″	.0001”	0-10	.010″	±.0001″	ANSI	2.75″	green
2011054	32Q	.025″	.00025″	0-5-0	.010″	±.00025″	ANSI	2.75″	green
2011055	32Q-RC	.025″	.00025″	0-10	.010″	±.00025″	ANSI	2.75″	green
2011226	D1K	.020″	.0001”	0-4-0	.008″	±.0001″	ANSI	2.75″	green
2011227	D1K-RC	.020″	.0001”	0-8	.008″	±.0001″	ANSI	2.75″	green
2011230	D3K	.050″	.00025″	0-10-0	.020″	±.00025″	ANSI	2.75″	green
2011231	D3K-RC	.050″	.00025″	0-20	.020″	±.00025″	ANSI	2.75″	green
2011234	D3Q	.050″	.0005″	0-10-0	.020″	±.0005″	ANSI	2.75″	green
2011235	D3Q-RC	.050″	.0005″	0-20	.020″	±.0005″	ANSI	2.75″	green
2011238	D3W	.050″	.001″	0-10-0	.020″	±.001″	ANSI	2.75″	green
2011239	D3W-RC	.050″	.001″	0-20	.020″	±.001″	ANSI	2.75″	green
2011242	D5G	.075″	.00025″	0-15-0	.030″	±.00025″	ANSI	2.75″	green
2011243	D5G-RC	.075″	.00025″	0-30	.030″	±.00025″	ANSI	2.75″	green
2011246	D5M	.075″	.0005″	0-15-0	.030″	±.0005″	ANSI	2.75″	green
2011247	D5M-RC	.075″	.0005″	0-30	.030″	±.0005″	ANSI	2.75″	green
2011250	D6K	.100″	.0005″	0-20-0	.040″	±.0005″	ANSI	2.75″	green
2011251	D6K-RC	.100″	.0005″	0-40	.040″	±.0005″	ANSI	2.75″	green
2011254	D6Q	.100″	.001″	0-20-0	.040″	±.001″	ANSI	2.75″	green
2011255	D6Q-RC	.100″	.001″	0-40	.040″	±.001″	ANSI	2.75″	green
2011258	D7I	.125″	.0005″	0-25-0	.050″	±.0005″	ANSI	2.75″	green
2011259	D7I-RC	.125″	.0005″	0-50	.050″	±.0005″	ANSI	2.75″	green
2011262	D7O	.125″	.001″	0-25-0	.050″	±.001″	ANSI	2.75″	green
2011263	D7O-RC	.125″	.001″	0-50	.050″	±.001″	ANSI	2.75″	green
2011266	D8I	.250″	.001″	0-50-0	.100″	±.001″	ANSI	2.75″	green
2011267	D8I-RC	.250″	.001″	0-100	.100″	±.001″	ANSI	2.75″	green

MARCATOR Q6I-RC DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Scale diameter	Dial color
2011867	Q1I	0.5 mm	0.002 mm	0-10-0	0.2 mm	ANSI	70 mm	yellow
2011868	Q1I-RC	0.5 mm	0.002 mm	0-20	0.2 mm	ANSI	70 mm	yellow
2011871	Q3I	1.25 mm	0.005 mm	0-25-0	0.5 mm	ANSI	70 mm	yellow
2011872	Q3I-RC	1.25 mm	0.005 mm	0-50	0.5 mm	ANSI	70 mm	yellow
2011875	Q6I	2.5 mm	0.01 mm	0-50-0	1 mm	ANSI	70 mm	yellow
2011876	Q6I-RC	2.5 mm	0.01 mm	0-100	1 mm	ANSI	70 mm	yellow
2011879	Q8I	5 mm	0.02 mm	0-100-0	2 mm	ANSI	70 mm	yellow
2011880	Q8I-RC	5 mm	0.02 mm	0-200	2 mm	ANSI	70 mm	yellow

MARCATOR DIAL INDICATOR

Outstanding quality due to a well thought out design, use of high quality materials, and the precision engineered mechanism’s guarantee
The concentric “Speed Read“ pointer (on 1.0“ and .500“ models) allows easy and safe reading of this dial indicator
Spindle and stem are made of resistant stainless steel
Supplied with: lug back and tolerance hands

Technical data

Order no.	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Scale diameter (inches)	Dial color
2016002	1.000″	.001″	0-100	.100″	±.001″	ANSI	2.25″	green
2016004	.500″	.001″	0-100	.100″	±.001″	ANSI	2.25″	green
2016005	.250″	.001″	0-100	.100″	±.001″	ANSI	2.25″	green

MARCATOR 23K DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Standard	Scale diameter (inches)	Dial color
2011049	28IN-RC	.250″	.001″	0-100	.100″	±.001″	ANSI	2.25″	green
2011157	C1/2K	.010″	.00005″	0-2-0	.004″	±.0001″	ANSI	2.25″	green
2011158	C1/2K-RC	.010″	.00005″	0-4	.004″	±.0001″	ANSI	2.25″	green
2011161	C1K	.020″	.0001”	0-4-0	.008″	±.0001″	ANSI	2.25″	green
2011162	C1K-RC	.020″	.0001”	0-8	.008″	±.0001″	ANSI	2.25″	green
2014761	22IN-RC	.025″	.0001”	0-10	.010″	±.0001″	ANSI	2.25″	green
2014791	22QN-RC	.025″	.00025″	0-10	.010″	±.00025″	ANSI	2.25″	green
2014808	23K-RC	.050″	.00025″	0-20	.020″	±.00025″	ANSI	2.25″	green
2014809	23W-RC	.050″	.001″	0-20	.020″	±.001″	ANSI	2.25″	green
2014810	23Q-RC	.050″	.0005″	0-20	.020″	±.0005″	ANSI	2.25″	green
2014811	25M-RC	.075″	.0005″	0-30	.030″	±.0005″	ANSI	2.25″	green
2014812	26K-RC	.100″	.0005″	0-40	.040″	±.0005″	ANSI	2.25″	green
2014813	26Q-RC	.100″	.001″	0-40	.040″	±.001″	ANSI	2.25″	green
2014814	27I-RC	.125″	.0005″	0-50	.050″	±.0005″	ANSI	2.25″	green
2014815	27O-RC	.125″	.001″	0-50	.050″	±.001″	ANSI	2.25″	green
2015781	22I	.025″	.0001”	0-5-0	.010″	±.0001″	ANSI	2.25″	green
2015782	22QN	.025″	.00025″	0-5-0	.010″	±.00025″	ANSI	2.25″	green
2015783	23K	.050″	.00025″	0-10-0	.020″	±.00025″	ANSI	2.25″	green
2015784	23Q	.050″	.0005″	0-10-0	.020″	±.0005″	ANSI	2.25″	green
2015785	23W	.050″	.001″	0-10-0	.020″	±.001″	ANSI	2.25″	green
2015786	25M	.075″	.0005″	0-15-0	.030″	±.0005″	ANSI	2.25″	green
2015787	26K	.100″	.0005″	0-20-0	.040″	±.0005″	ANSI	2.25″	green
2015789	26Q	.100″	.001″	0-20-0	.040″	±.001″	ANSI	2.25″	green
2015790	27I	.125″	.0005″	0-25-0	.050″	±.0005″	ANSI	2.25″	green
2015791	27O	.125″	.001″	0-25-0	.050″	±.001″	ANSI	2.25″	green
2015792	28IN	.250″	.001″	0-50-0	.100″	±.001″	ANSI	2.25″	green

MARCATOR 23I DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Scale diameter	Dial color
2011810	P1/2I	0.25 mm	0.001 mm	0-5-0	0.1 mm	ANSI	57.15 mm	yellow
2011812	P1/2I-RC	0.25 mm	0.001 mm	0-10	0.1 mm	ANSI	57.15 mm	yellow
2011817	P1I-RC	0.5 mm	0.002 mm	0-20	0.2 mm	ANSI	57.15 mm	yellow
2014817	23IM-RC	1.25 mm	0.005 mm	0-50	0.5 mm	ANSI	57.15 mm	yellow
2014818	26IM-RC	2.5 mm	0.01 mm	0-100	1 mm	ANSI	57.15 mm	yellow
2014819	28IM-RC	5 mm	0.02 mm	0-200	2 mm	ANSI	57.15 mm	yellow
2015793	23I	1.25 mm	0.005 mm	0-25-0	0.5 mm	ANSI	57.15 mm	yellow
2015794	26I	2.5 mm	0.01 mm	0-50-0	1 mm	ANSI	57.15 mm	yellow
2015795	28IM	5 mm	0.02 mm	0-100-0	2 mm	ANSI	57.15 mm	yellow

MARCATOR B6Q-RC DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Error limit over 2.5 rotations (inches)	Standard	Scale diameter (inches)	Dial color
2011000	12I	.025″	.0001”	0-5-0	.010″	±.0001″	± .0001″	ANSI	1.75″	green
2011001	12I-RC	.025″	.0001”	0-10	.010″	±.0001″	± .0001″	ANSI	1.75″	green
2011004	12Q	.025″	.00025″	0-5-0	.010″	±.00025″	± .00025″	ANSI	1.75″	green
2011106	B3K	.050″	.00025″	0-10-0	.020″	±.00025″	± .00025″	ANSI	1.75″	green
2011107	B3K-RC	.050″	.00025″	0-20	.020″	±.00025″	± .00025″	ANSI	1.75″	green
2011110	B3Q	.050″	.0005″	0-10-0	.020″	±.0005″	± .0005″	ANSI	1.75″	green
2011111	B3Q-RC	.050″	.0005″	0-20	.020″	±.0005″	± .0005″	ANSI	1.75″	green
2011114	B3W	.050″	.001″	0-10-0	.020″	±.001″	± .001″	ANSI	1.75″	green
2011115	B3W-RC	.050″	.001″	0-20	.020″	±.001″	± .001″	ANSI	1.75″	green
2011118	B5M	.075″	.0005″	0-15-0	.030″	±.0005″	± .0005″	ANSI	1.75″	green
2011119	B5M-RC	.075″	.0005″	0-30	.030″	±.0005″	± .0005″	ANSI	1.75″	green
2011123	B6K	.100″	.0005″	0-20-0	.040″	±.0005″	± .0005″	ANSI	1.75″	green
2011124	B6K-RC	.100″	.0005″	0-40	.040″	±.0005″	± .0005″	ANSI	1.75″	green
2011128	B6Q	.100″	.001″	0-20-0	.040″	±.001″	± .001″	ANSI	1.75″	green
2011129	B6Q-RC	.100″	.001″	0-40	.040″	±.001″	± .001″	ANSI	1.75″	green
2011133	B7I	.125″	.0005″	0-25-0	.050″	±.0005″	± .0005″	ANSI	1.75″	green
2011134	B7I-RC	.125″	.0005″	0-50	.050″	±.0005″	± .0005″	ANSI	1.75″	green
2011137	B7O	.125″	.001″	0-25-0	.050″	±.001″	± .001″	ANSI	1.75″	green
2011138	B7O-RC	.125″	.001″	0-50	.050″	±.001″	± .001″	ANSI	1.75″	green
2011141	B8I	.250″	.001″	0-50-0	.100″	±.001″	± .001″	ANSI	1.75″	green
2011142	B8I-RC	.250″	.001″	0-100	.100″	±.001″	± .001″	ANSI	1.75″	green

MARCATOR O6I-RC DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pull back spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250″ long contact
Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise (Order by part number and specify dial style desired)
For other dial styles or special requirements – call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Standard	Scale diameter	Dial color
2011765	O1I	0.5 mm	0.002 mm	0-10-0	0.2 mm	ANSI	45 mm	yellow
2011767	O1I-RC	0.5 mm	0.002 mm	0-20	0.2 mm	ANSI	45 mm	yellow
2011770	O3I	1.25 mm	0.005 mm	0-25-0	0.5 mm	ANSI	45 mm	yellow
2011772	O3I-RC	1.25 mm	0.005 mm	0-50	0.5 mm	ANSI	45 mm	yellow
2011775	O6I	2.5 mm	0.01 mm	0-50-0	1 mm	ANSI	45 mm	yellow
2011776	O6I-RC	2.5 mm	0.01 mm	0-100	1 mm	ANSI	45 mm	yellow
2011779	O8I	6.25 mm	0.025 mm	0-125-0	2.5 mm	ANSI	45 mm	yellow
2011780	O8I-RC	6.25 mm	0.025 mm	0-250	2.5 mm	ANSI	45 mm	yellow

MARCATOR A1/2Q DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
Normally furnished: balanced dial with + on right; centered vertical lug back; regular contact point PT-43, .09” radiused, .093” long
Optional dials: balanced with + on left; continuous clockwise; continuous counterclockwise
Order by part number and specify dial style desired. For other dial styles or special requirements, call Mahr

Order no.	Product type	Measuring span (inches)	Graduation value inch	Type of dial face	Pointer rotation (inches)	Error limit inches	Error limit over 2.5 rotations (inches)	Standard	Scale diameter (inches)	Dial color
2011089	A1/2Q	.010″	.0001”	0-2-0	.004″	± .0001″	± .0001″	ANSI	1.25″	green
2011091	A2I	.025″	.0001”	0-5-0	.010″	± .0001″	± .0001″	ANSI	1.25″	green
2011093	A3Q	.050″	.0005″	0-10-0	.020″	± .0005″	± .0005″	ANSI	1.25″	green
2011095	A6Q	.100″	.001″	0-20-0	.040″	± .001″	± .001″	ANSI	1.25″	green

MARCATOR N6I DIAL INDICATOR

Unit construction and removable movement save repair/cleaning time and maintenance
Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
Jeweled bearings resist friction, add to longer indicator life
Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
Soft tinted dials (green – inch / yellow – metric) minimize eye strain
Special steel alloy
Balanced dial hand affords no shift, precise reading
Controlled rack and pinion mesh eliminates slope for precise response and reading
Smooth adjusting bezels for easy setup
Positive pressure pullback spring requires less maintenance
Compliance with ANSI/AGD dimensional and accuracy specifications
Normally furnished: balanced dial with + on right; centered vertical lug back; regular contact point PT-43, .09” radiused, .093” long
Optional dials: balanced with + on left; continuous clockwise; continuous counterclockwise
Order by part number and specify dial style desired. For other dial styles or special requirements, call Mahr

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit over 2.5 rotations (mm)	Standard	Scale diameter	Dial color
2011743	N1/2O	0.25 mm	0.002 mm	0-5-0	0.1 mm	± 0.002 mm	ANSI	32 mm	yellow
2011745	N3I	1.25 mm	0.005 mm	0-25-0	0.5 mm	± 0.005 mm	ANSI	32 mm	yellow
2011759	N6I	2.5 mm	0.01 mm	0-50-0	1 mm	± 0.01 mm	ANSI	32 mm	yellow

MARCATOR – DIAL INDICATOR, MM

MARCATOR 810 AU PRECISION DIAL INDICATOR

High contrast dial face
Adjustable tolerance markers
Chrome plated housing
Lifter protection cap on the measuring spindle
Precision gears and pinions

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1 revolution µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	Scale diameter	Dial color
4311000	810 S	10 mm	0.01 mm	0 – 100	1 mm	15 µm	10 µm	9 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	50 mm	white
4311050	810 A	10 mm	0.01 mm	0 – 100	1 mm	15 µm	10 µm	9 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	50 mm	white
4311060	810 AT	10 mm	0.01 mm	100 – 0	1 mm	15 µm	10 µm	9 µm	5 µm	3 µm	3 µm	DIN 878	0.8 mm	50 mm	white
4321000	810 SV	40 mm	0.01 mm	0 – 100	1 mm	25 µm	15 µm	10 µm	5 µm	6 µm	3 µm	Factory standard	0.1 mm	50 mm	white
4329050	810 AU	10 mm	0.01 mm	100 – 0	1 mm	15 µm	10 µm	9 µm	5 µm	5 µm	5 µm	Factory standard	0.1 mm	50 mm	white

MARCATOR 810 SRM PRECISION DIAL INDICATOR

High contrast dial face
Adjustable tolerance markers
Chrome plated housing
Lifter protection cap on the measuring spindle
Precision gears and pinions

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1 revolution µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	Scale diameter
4311070	810 SM	1 mm	0.001 mm	0-100	0.1 mm	4 µm	3 µm	2 µm	1 µm	1.5 µm	1.5 µm	Factory standard	4 mm	50 mm
4311080	810 SRM	5 mm	0.001 mm	0-100-0	0.2 mm	10 µm	5 µm	3 µm	2 µm	3 µm	3 µm	Factory standard	0.1 mm	50 mm

MARCATOR 810 AX PRECISION DIAL INDICATOR

High contrast dial face
Adjustable tolerance markers
Chrome plated housing
Lifter protection cap on the measuring spindle
Precision gears and pinions

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1 revolution µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	Scale diameter	Dial color
4331000	810 AX	10 mm	0.1 mm	0 – 10	10 mm	50 µm	50 µm	30 µm	15 µm	15 µm	15 µm	Factory standard	0.5 mm	50 mm	white

High contrast dial face
Adjustable tolerance markers
Chrome plated housing
Precision gears and pinions
Hermetically sealed upper protective measuring spindle cap, bezel and transparent dial cover; sealed with O-rings
Measuring spindle sealed with rubber sleeve, thus preventing contamination by liquids and impurities

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1 revolution µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	IP protection category	Dial color
4315000	810 SW	10 mm	0.01 mm	0 – 100	1 mm	15 µm	10 µm	9 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	IP 54	white
4326000	803 SW	3 mm	0.01 mm	0 – 50	0.5 mm	10 µm	9 µm	8 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	IP 54	white

High contrast dial face
Adjustable tolerance markers
Chrome plated housing
Hermetically sealed protective measuring spindle cap
Limited measuring range for error free readings
Large overtravel (ca. 9 mm) for easier insertion of test items in measuring devices
Precision gears and pinions

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	Dial color
4317000	810 SB	0.8 mm	0.01 mm	40 – 0 – 40	0.8 mm	9 µm	6 µm	3 µm	3 µm	3 µm	DIN 878	9 mm	white
4324250	803 SB	0.4 mm	0.01 mm	20 – 0- 20		9 µm	8 µm	3 µm	3 µm	3 µm	Factory standard	4.5 mm	white

MARCATOR 810 AG LARGE DIAL INDICATOR

Large, high contrast dial face
Adjustable tolerance markers
Chrome plated housing
Lifter protection cap on the measuring spindle
Precision gears and pinions

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1 revolution µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	Scale diameter	Dial color
4322000	810 AG	10 mm	0.01 mm	0 – 100	1 mm	17 µm	15 µm	10 µm	5 µm	5 µm	3 µm	Factory standard	0.1 mm	112 mm	white

MARCATOR – SMALL DIAL INDICATOR, MM

MARCATOR 805 A SMALL PRECISION DIAL INDICATORS

High contrast dial face
Adjustable tolerance markers
Chrome plated housing
Lifter protection cap on the measuring spindle
Precision gears and pinions

Technical data

Order no.	Product type	Measuring span in mm	Graduation value mm	Type of dial face	Range per rev. in mm	Error limit measuring range µm	Error limit 1 revolution µm	Error limit 1/2 revolution µm	Error limit 1/10 revolution µm	Hysteresis fu (µm)	Repeatability fw (µm)	Standard	Overtravel mm	Scale diameter	Dial color
4324000	803 S	3 mm	0.01 mm	0 – 50	0.5 mm	10 µm	9 µm	8 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	34 mm	white
4324050	803 A	3 mm	0.01 mm	0 -50	0.5 mm	10 µm	9 µm	8 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	34 mm	white
4324060	805 A	5 mm	0.01 mm	0 – 100	1 mm	12 µm	10 µm	9 µm	5 µm	3 µm	3 µm	DIN 878	0.1 mm	34 mm	white

MARCATOR 1087 BRI DIGITAL INDICATOR

Integrated wireless transmitter
High-contrast LCD display
Operating and display unit (bezel) can be rotated through 280°
Lifter protection cap on the measuring spindle
Clamping shaft and measuring pin made of hardened stainless steel
Immediate measurements due to the Reference System

Technical data

Order no.	Product type	Measuring span in mm	Measuring span (inches)	Resolution	Resolution inches	Graduation value mm	Graduation value inch	Range of analog display mm	Range of analog display inches	Error limit (mm)	Repeatability mm	Standard	Measuring force (N)	IP protection category	Height of digits
4337664	1087 BRi	12.5 mm	.5″	0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm	.00002″ / .00005″ / .0001″ / .0002″ / .0005″	0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05	.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″	± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2	± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”	0.004 mm	0.001 mm	Factory standard	0.65 – 0.9	IP 42	8.5 mm

Functions

ON/OFF
RESET (set display to zero)
mm/inch
PRESET (enter anumerical value) from range 500 mm
Reversal of counting direction
TOL (enter tolerance limit values)
START/STOP search for reversal point
MAX/MIN memory for searching the reversal point
ABS (display can be set to zero without losing reference to preset)
0 (set the analog display to zero)
DATA (data transmission via connection cable)
Factor (adjustable)
LOCK (individual button lock)