Measuring Instruments Archives - Page 49 of 82 - Gokul Traders

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
ntegrated wireless
Battery life approx. 2 years (approx. 0.5 in wireless mode)
IP 65
instruction mnual
battery
setting values
case

Height of Digits

10 mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4157115	0 – 100	0 – 4″	0.001 / .00005″	6.5 mm	0.5 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to ORIGIN)
mm/inch
ORIGIN (for entering a numerical value)
LOCK function (key lock)
TOL (Tolerance and warning limits)
DATA (data transmission)
HOLD (storage of measured values)

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Integrated wireless
Battery life approx. 2 years (approx. 0.5 in wireless mode)
IP 65
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case

Heights of Digits

10 mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4157100	0 – 25	0 – 1″	0.001 / .00005″	2 µm	6.5 mm	0.5 mm	5 – 10
4157101	25 – 50	1 – 2″	0.001 / .00005″	2 µm	6.5 mm	0.5 mm	5 – 10
4157102	50 – 75	2 – 3″	0.001 / .00005″	3 µm	6.5 mm	0.5 mm	5 – 10
4157103	75 – 100	3 – 4″	0.001 / .00005″	3 µm	6.5 mm	0.5 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to ORIGIN)
mm/inch
ORIGIN (for entering a numerical value)
LOCK function (key lock)
TOL (Tolerance and warning limits)
DATA (data transmission)
HOLD (storage of measured values)

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Battery life approx. 2 years
IP 65
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case

Height of Digits

10 mm

.

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4157011	0 – 25	0 – 1″	0.001 / .00005″	2 µm	6.5 mm	0.5 mm	5 – 10
4157012	25 – 50	1 – 2″	0.001 / .00005″	2 µm	6.5 mm	0.5 mm	5 – 10
4157013	50 – 75	2 – 3″	0.001 / .00005″	3 µm	6.5 mm	0.5 mm	5 – 10
4157014	75 – 100	3 – 4″	0.001 / .00005″	3 µm	6.5 mm	0.5 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
LOCK function (key lock)
HOLD (storage of measured values)

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
IP 40
instruction manual
battery
case

Height of Digits

10 mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4157010	0 – 25	0 – 1″	0.001 / .00005″	2 µm	6.5 mm	0.5 mm	5 – 10

Functions

RESET (set display to zero)
mm/inch
HOLD (storage of measured values)
LOCK function (key lock)

Sliding spindle
High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Digimatic
Opto RS232C
USB
IP 52
battery
instruction manual
case

Height of Digit

8.5mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151724	0 – 25	0 – 1″	0.001 / .00005″	4 µm	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)
LOCK function (key lock)

MICROMAR 40 EWR DIGITAL OUTSIDE MICROMETER

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Digimatic
Opto RS232C
USB
Battery life approx. 2 years
IP 65
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case

Height of digits

8.5 mm

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Notes error limit	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
<4151705	0 – 25	0 – 1″	0.001 / .00005″	2 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151706	25 – 50	1 – 2″	0.001 / .00005″	2 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151707	50 – 75	2 – 3″	0.001 / .00005″	3 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151708	75 – 100	3 – 4″	0.001 / .00005″	3 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151740	100 – 125	4 – 5″	0.001 / .00005″	6 µm		6.5 mm	0.635 mm	5 – 10
4151741	125 – 150	5 – 6″	0.001 / .00005″	6 µm		6.5 mm	0.635 mm	5 – 10
4151742	150 – 175	6 – 7″	0.001 / .00005″	7 µm		6.5 mm	0.635 mm	5 – 10
4151743	175 – 200	7 – 8″	0.001 / .00005″	7 µm		6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
LOCK function (key lock)
DATA (data transmission via connection cable)

MICROMAR 40 EWR DIGITAL OUTSIDE MICROMETER SET

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Digimati
Opto RS232C
USB
Battery life approx. 2 years
IP 65
instruction manual
battery
setting values
case

Height of digits

8.5mm

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151709	0 – 100	0 – 4″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10

Functions

AUTO-ON / OFF
RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
Lock/Unlock
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)

MARAMETER 75-P30 – DEPTH GAGE

MARAMETER 75P-30 INDICATING DEPTH GAGE

Rectangular, flat base and radiused contact point
Supplied with contact point for measuring depths from the base as a reference
Contact points for other depths are available upon request

Depth gage

Technical data

Order no.	Product type	Measuring range inches	Measuring bridge width inch	Beam width	Length of beam	Graduation value inch	Length of fixed measuring contact
2051088	75P-30	0 – .150″	0.56 inch	14 mm	64 mm	.0005″	0.13 inch

MARAMETER 75P-30M INDICATING DEPTH GAGE

Rectangular, flat base and radiused contact point
Supplied with contact point for measuring depths from the base as a reference
Contact points for other depths are available upon request

Depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Graduation value mm	Length of fixed measuring contact
2051089	75P-30M	0 – 4	0.56 inch	14 mm	64 mm	0.01 mm	3 mm

MARAMETER 75P-55M

Single and multi-purpose bases with choice of comparative or direct measurement indicators
Collet mounting allows for interchanging indicators and bases to meet a wide range of requirements
Wide range of contact points available to cover any depth measurement
Setting masters available with anvil ground to specified depth (accuracy ±2.5µm/± .0001″)

Depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge diameter mm	Beam width	Length of beam	Graduation value mm
2051093	75P-50M	2,50		19 mm	50 mm	0.01 mm
2051095	75P-51M	2,50		19 mm	76 mm	0.01 mm
2051097	75P-52M	2,50		19 mm	102 mm	0.01 mm
2051099	75P-53M	2,50		19 mm	152 mm	0.01 mm
2051101	75P-54M	2,50		19 mm	203 mm	0.01 mm
2051103	75P-55M	2,50	19 mm			0.01 mm
2051105	75P-56M	2,50	32 mm			0.01 mm

MARAMETER 75P-35 – DEPTH GAGE

MARAMETER 75P-35M

Depth gages have three interchangeable contact points, allowing inspection of depths to 76 mm / 3“
Check depths against a setting

Depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Graduation value mm	Length of fixed measuring contact
2051091	75P-35M	0 – 75	0.56 inch	14 mm	64 mm	0.01 mm	3 mm

MARAMETER 75P-35

Depth gages have three interchangeable contact points, allowing inspection of depths to 76 mm / 3“
Check depths against a setting

Technical Data

Order no.	Product type	Measuring range inches	Measuring bridge width inch	Beam width	Length of beam	Graduation value inch	Length of fixed measuring contact
2051090	75P-35	0 – 3″	0.56 inch	14 mm	64 mm	.001″	0.13 inch

MARAMETER DEPTH GAGE 75B-1

Available with dial indicator (75B-1 Models) or Maxμm®III and μMaxμm®II digital electronic indicators (EMD-75B and XLI-75B Models)
89 x 102 mm / 3.50 x 4“ hardened, ground work surface provides excellent reference surface
Four #10-32 tapped holes provided for mounting part location fixturing
Indicator vertically adjustable over 32 mm / 1.25“
Two contact points provided, 6 mm / .25“ and 32 mm / 1.25“ to check features up to 50 mm / 2“ deep

Marameter depth gage

Technical Data

Order no.	Product type	Measuring range inches	Measuring bridge width inch	Beam width	Length of beam	Graduation value inch	Measuring depth mm
2051077	75B-1	0 – 1″	3.5 inch	89 mm	102 mm	.001″	25 mm

MARAMETER DEPTH GAGE 75B-1M

Available with dial indicator (75B-1 Models) or Maxμm®III and μMaxμm®II digital electronic indicators (EMD-75B and XLI-75B Models)
89 x 102 mm / 3.50 x 4“ hardened, ground work surface provides excellent reference surface
Four #10-32 tapped holes provided for mounting part location fixturing
Indicator vertically adjustable over 32 mm / 1.25“
Two contact points provided, 6 mm / .25“ and 32 mm / 1.25“ to check features up to 50 mm / 2“ deep

Marameter depth gage

Technical Data

Order no.	Product type	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Graduation value mm	Measuring depth mm
2051078	75B-1M	0 – 25	3.5 inch	89 mm	102 mm	0.01 mm	25 mm

MARAMETER DEPTH GAGE(XLI-75B-2)

Available with dial indicator (75B-1 Models) or Maxμm®III and μMaxμm®II digital electronic indicators (EMD-75B and XLI-75B Models)
89 x 102 mm / 3.50 x 4“ hardened, ground work surface provides excellent reference surface
Four #10-32 tapped holes provided for mounting part location fixturing
Indicator vertically adjustable over 32 mm / 1.25“
Two contact points provided, 6 mm / .25“ and 32 mm / 1.25“ to check features up to 50 mm / 2“ deep

Marameter depth gage

Technical Data

Order no.	Product type	Measuring range inches	Measuring range mm	Measuring bridge width inch	Beam width	Length of beam	Measuring depth mm
2051888	EMD-75B-1			3.5 inch	89 mm	102 mm
2051889	EMD-75B-1D			3.5 inch	89 mm	102 mm
2057552	(XLI-75B-1)	0 – 1″	0 – 25	3.5 inch	89 mm	102 mm	50 mm
2057553	(XLI-75B-2)	0 – .5″	0 – 12,5				38 mm

MARAMETER 65P-40 INDICATING DEPTH GAGE WITH NEEDLE CONTACT AND V-SHAPED BASE

V-shaped base and needle contact
Movement is Push-Down style

Indicating depth gage

Technical Data

Order no.	Product type	Measuring range inches	Graduation value inch
2051075	65P-40	0 – .075″	.0005″

MARAMETER 65P-40M INDICATING DEPTH GAGE WITH NEEDLE CONTACT AND V-SHAPED BASE

V-shaped base and needle contact
Movement is Push-Down style

Indicating depth gage

Technical Data

Order no.	Product type	Measuring range mm	Length of beam	Graduation value mm
2051076	65P-40M	0 – 2	64 mm	0.01 mm

Large measuring bridge hardened and chrome plated surface
Plan grinded Measuring surface
Holder for dial indicators with Ø 8 mm shank

Technical data

Order no.	Product type	Beam width	Length of beam	Mounting hole for indicator
4494010	837	16 mm	80 mm	8 mm
4494011	837	16 mm	100 mm	8 mm
4494012	837	20 mm	150 mm	8 mm