Measuring Instruments Archives - Page 51 of 82

MARCAL 18 N WORKSHOP VERNIER CALIPERS

Vernier and main scale have a satin chrome finish for glare free reading
Locking screw above
Rounded measuring blades for inside measurements
Measuring surfaces made of steel
Slide and beam made of hardened stainless steel
Raised guideway for the protection of the scale
up to 1000 mm delivered with a case, over 1000 mm individually packed

Technical data

Order no.	Measuring range mm	Readings mm	Error limit (mm)	Standard
4112200	0 – 200	0.02 mm	0.05 mm	Factory standard
4112201	0 – 300	0.02 mm	0.05 mm	Factory standard
4112210	0 – 500	0.05 mm	0.07 mm	DIN 862
4112211	0 – 800	0.05 mm	0.1 mm	DIN 862
4112212	0 – 1000	0.05 mm	0.12 mm	DIN 862
4112213	0 – 1500	0.05 mm	0.18 mm	DIN 862
4112214	0 – 2000	0.05 mm	0.22 mm	DIN 862

MARCAL 18 N WORKSHOP VERNIER CALIPERS

Measuring blades for outside measurements
High contrast analog display
Locking screw above
Rounded measuring blades for inside measurements
Slide and beam made of hardened stainless steel
Immediate measurements due to the Reference System
Raised guideway for the protection of the scale
Excellent resistance against dust, coolants and lubricants
Dirt wipers are integrated in the slide
up to 1000 mm delivered with a case, over 1000 mm individually packed

Technical data

Order no.	Measuring range mm	Measuring range inches	Readings mm	Vernier value inch	Error limit (mm)	Error limit inches	Standard
4112220	0 – 300		0.02 mm		0.05 mm		Factory standard
4112221	0 – 500		0.02 mm		0.06 mm		Factory standard
4112222	0 – 800		0.02 mm		0.08 mm		Factory standard
4112223	0 – 1000		0.02 mm		0.08 mm		Factory standard
4112224	0 – 1500		0.02 mm		0.1 mm		Factory standard
4112225	0 – 2000		0.02 mm		0.12 mm		Factory standard
4112230	0 – 300	0 – 12″	0.02 mm	.001″	0.05 mm	.002″	Factory standard
4112231	0 – 500	0 – 20″	0.02 mm	.001″	0.06 mm	.0025″	Factory standard
4112232	0 – 800	0 – 32″	0.02 mm	.001″	0.08 mm	.003″	Factory standard
4112233	0 – 1000	0 – 40″	0.02 mm	.001″	0.08 mm	.003″	Factory standard
4112234	0 – 1500	0 – 60″	0.02 mm	.001″	0.1 mm	.004″	Factory standard
4112235	0 – 2000	0 – 80″	0.02 mm	.001″	0.12 mm	.005″	Factory standard

Vernier and main scale have a satin chrome finish for glare free reading
Thumb clamp
Measuring surfaces made of steel
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
Raised guideway for the protection of the scale
thread table
case

Technical data

Order no.	Measuring range mm	Measuring range inches	Readings mm	Vernier value inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4100600	0 – 150	0 – 6″	0.05 mm	1/128″	0.05 mm	.002″	DIN 862	rectangular

Vernier and main scale have a satin chrome finish for glare free reading
Locking screw below
Measuring surfaces made of steel
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
thread table
case

Technical data

Order no.	Measuring range mm	Measuring range inches	Readings mm	Vernier value inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4100500	0 – 150	0 – 6″	0.05 mm	1/128″	0.05 mm	.002″	DIN 862	rectangular

MARCAL 16 GN CALIPER WITH ANALOG DISPLAY

Vernier and main scale have a satin chrome finish for glare free reading
Locking screw above
Measuring surfaces made of steel
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
Raised guideway for the protection of the scale
thread table
case

Technical data

Order no.	Measuring range mm	Measuring range inches	Readings mm	Vernier value inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4100660	0 – 130		0.02 mm		0.05 mm		Factory standard	rectangular
4100661	0 – 180		0.02 mm		0.05 mm		Factory standard	rectangular
4100662	0 – 280		0.02 mm		0.05 mm		Factory standard	rectangular
4100680	0 – 130	0 – 5″	0.02 mm	.001″	0.05 mm	.0015″	Factory standard	rectangular
4100681	0 – 180	0 – 7″	0.02 mm	.001″	0.05 mm	.002″	Factory standard	rectangular
4100682	0 – 280	0 – 11″	0.02 mm	.001″	0.05 mm	.002″	Factory standard	rectangular

MARCAL 16 GN CALIPER WITH ANALOG DISPLAY

Vernier and main scale have a satin chrome finish for glare free reading
Locking screw above
Measuring surfaces made of steel
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
Raised guideway for the protection of the scale
thread table
case

Technical data

Order no.	Measuring range mm	Measuring range inches	Readings mm	Vernier value inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4100650	0 – 150		0.02 mm		0.05 mm		Factory standard	rectangular
4100651	0 – 200		0.02 mm		0.05 mm		Factory standard	rectangular
4100652	0 – 300		0.02 mm		0.05 mm		Factory standard	rectangular
4100670	0 – 150	0 – 6″	0.02 mm	.001″	0.05 mm	.0015″	Factory standard	rectangular
4100671	0 – 200	0 – 8″	0.02 mm	.001″	0.05 mm	.002″	Factory standard	rectangular
4100672	0 – 300	0 – 12″	0.02 mm	.001″	0.05 mm	.002″	Factory standard	rectangular

Vernier and main scale have a satin chrome finish for glare free reading
Locking screw above
Measuring surfaces made of steel
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
Raised guideway for the protection of the scale
thread table
case

<td4100400

Order no.	Measuring range mm	Measuring range inches	Readings mm	Vernier value inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
0 – 150	0 – 6″	0.05 mm	1/128″	0.05 mm	.002″	DIN 862	rectangular
4100401	0 – 200	0 – 8″	0.05 mm	1/128″	0.05 mm	.002″	DIN 862	rectangular
4100402	0 – 300	0 – 12″	0.05 mm	1/128″	0.05 mm	.002″	DIN 862	rectangular
4100420	0 – 150		0.05 mm		0.05 mm		DIN 862	rectangular
4100421	0 – 200		0.05 mm		0.05 mm		DIN 862	rectangular
4100422	0 – 300		0.05 mm		0.05 mm		DIN 862	rectangular

High contrast analog display
Locking screw above
Lapped guideway
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
Immediate measurements due to the Reference System
Raised guideway for the protection of the scale
Excellent resistance against dust, coolants and lubricants
Dirt wipers are integrated in the slide
Marcal Digital caliper can support USB
Opto RS232C
Digimatic
IP 67
battery
instruction manual
case
Battery life approx. 3 years

Height of digits

8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103076	0 – 150	0 – 6″	0.01 / .0005″	0.03 mm	.001″	Factory standard	round

Functions of Marcal Digital Caliper

ON/OFF
AUTO-ON / OFF
mm/inch
LOCK function (key lock)
RESET (set display to zero)
DATA (data transmission via connection cable)

High contrast analog display
Locking screw above
Lapped guideway
Slide and beam made of hardened stainless steel
Immediate measurements due to the Reference System
Raised guideway for the protection of the scale
Excellent resistance against dust, coolants and lubricants
Dirt wipers are integrated in the slide
Marcal digital caliper can support USB
Opto RS232C
Digimatic
IP 67
battery
instruction manual
case
Battery life approx. 3 years

Height of digits

8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103078	20 – 170	0.8 – 6.7″	0.01 / .0005″	0.03 mm	.001″	Factory standard	none

Functions of Marcal Digital Caliper

ON/OFF
AUTO-ON / OFF
mm/inch
LOCK function (key lock)
RESET (set display to zero)
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)

High contrast analog display
Locking screw above
Lapped guideway
Slide and beam made of hardened stainless steel
Immediate measurements due to the Reference System
Raised guideway for the protection of the scale
Excellent resistance against dust, coolants and lubricants
Dirt wipers are integrated in the slide
Marcal digital caliper can support USB
Opto RS232C
Digimatic
IP 67
batteryins
truction manual
case
Battery life approx. 3 years

Height of digits

8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103077	0 – 140	0 – 6″	0.01 / .0005″	0.03 mm	.001″	Factory standard	none

Functions of Marcal Digital Caliper

ON/OFF
AUTO-ON / OFF
mm/inch
LOCK function (key lock)
RESET (set display to zero)
DATA (data transmission via connection cable)

High contrast analog display
Locking screw above
Lapped guideway
Measuring blade for inside measurements
Slide and beam made of hardened stainless steel
Step measuring function
Immediate measurements due to the Reference System
Raised guideway for the protection of the scale
Excellent resistance against dust, coolants and lubricants
Dirt wipers are integrated in the slide
Digital caliper can support USB
Opto RS232C
Digimatic
IP 67
battery
instruction manual
case
Battery life approx. 3 years

Height of digits

8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103075	0 – 150	0 – 6″	0.01 / .0005″	0.03 mm	.001″	Factory standard	round

Functions of Digital Caliper

ON/OFF
AUTO-ON / OFF
mm/inch
LOCK function (key lock)
RESET (set display to zero)
DATA (data transmission via connection cable)

High contrast analog display
Locking screw above
Lapped guideway
Slide and beam made of hardened stainless steel
Immediate measurements due to the Reference System
Raised guideway for the protection of the scale
Excellent resistance against dust, coolants and lubricants
Dirt wipers are integrated in the slide
Digital caliper can support USB
Opto RS232C
Digimatic
IP 67
battery
instruction manual
case
Battery life approx. 3 years

Height of digits

8.5 mm

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit (mm)	Error limit inches	Standard	Depth Rod
4103081	0 – 150	0 – 6″	0.01 / .0005″	0.05 mm	.002″	Factory standard	none

Functions of Digital Caliper

ON/OFF
AUTO-ON / OFF
mm/inch
LOCK function (key lock)
RESET (set display to zero)
DATA (data transmission via connection cable)