- To measure the thickness of any non-magnetic coating on magnetic substrate substrate: steel, iron, magnetic stainless steel (non-magnetic stainless steel is not included) coating: zinc, copper, chrome, tin, plastic, paint (nickel is not included)
- Low and high limits with judgement
- Calculate average value automatically
Check the PDF
- Integrated with magnetic-induction probe (Fe) and eddy current probe (Nfe), switch to the suitable probe automatically according to the material to be measured
- Magnetic induction probe (Fe) is to measure the thickness of non-magnetic coating on magnetic substrate Substrate: iron, steel, magnetic stainless steel (does not include non-magnetic stainless steel) Coating: zinc, copper, chrome-tin, plastic powder, paint (does not include nickel)
- Eddy current probe (NFe) is to measure the thickness of non-conductive coating on non-magnetic metal substrate Substrate: copper, aluminum, zinc, non-magnetic stainless steel Coating: plastic powder, paint, anodizing
- Coating thickness gage is Set to zero without calibration foil
- Coating thickness gage Power off automatically (40 seconds without operation)
Check the PDF
- Suitable for small surfaces, concave or convex surfaces after calibrated
- Magnetic induction probe (Fe) is to measure the thickness of non-magnetic coating on magnetic substrate Substrate: iron, steel, magnetic stainless steel (does not include non-magnetic stainless steel) Coating: zinc, copper, chrome-tin, plastic powder, paint (does not include nickel)
- Eddy current probe (NFe) is to measure the thickness of non-conductive coating on non-magnetic metal substrate Substrate: copper, aluminum, zinc, non-magnetic stainless steel Coating: plastic powder, paint, anodizing
Check the PDF
- To check the roughness of steel surfaces which have been blast cleaned before painting
- Meets ISO 8503/1
- Rust-proof, made of pure Nickel
| Code |
Machining method |
Roughness (Ra) |
Roughness (Rz) |
Quantity |
| ISR-CS017 |
Shot blasting |
3.2, 8, 13, 18µm |
19.2, 48, 78, 108µm |
4pcs |
| ISR-CS018 |
Grit blasting |
3.2, 10.5, 18, 25µm |
19.2, 63, 108, 150µm |
4pcs |
Check the PDF
- To check the roughness of steel surfaces which have been blast cleaned before painting
- Meets ISO 8503/1
- Rust-proof, made of pure Nickel
| Code |
Machining method |
Roughness (Ra) |
Roughness (Rz) |
Quantity |
| ISR-CS017 |
Shot blasting |
3.2, 8, 13, 18µm |
19.2, 48, 78, 108µm |
4pcs |
| ISR-CS018 |
Grit blasting |
3.2, 10.5, 18, 25µm |
19.2, 63, 108, 150µm |
4pcs |
Check the PDF
- To calibrate roughness testers
- Meets ISO 5436-1: 2000
- Rust proof, made of pure Nickel
Check the PDF
- For checking, identifying and specifying the roughness by symbol
- Accuracy: +20% ~ -25%, Ra<0.1µm Accuracy: +12% ~ -17%, Ra>0.1µm
- Meets ISO 2632 (ISR-CS329 meets ISO 8503/1)
- Rust-proof, made of pure Nickel
Check the PDF
- For checking, identifying and specifying the roughness by symbol
- Accuracy: +20% ~ -25%, Ra<0.1µm Accuracy: +12% ~ -17%, Ra>0.1µm
- Meets ISO 2632
- Rust-proof, made of pure Nickel
Check the PDF
- Automatic probe leveling
- Language: English, French, German, Italian, Spanish, Portuguese
- 12 roughness parameters
- Can set tolerance
- Measuring range up to 400µm, can measure grit and shot blasting
- Traverse length up to 16mm
- The probe can be set at 90°or 270°, for transverse measurement
- Memory of maximum 100 results
Check the PDF
- Automatic probe leveling
- Language: English, French, German, Italian, Spanish, Portuguese
- 12 roughness parameters
- Can set tolerance
- Measuring range up to 400µm, can measure grit and shot blasting
- Traverse length up to 16mm
- The probe can be set at 90°or 270°, for transverse measurement
- Memory of maximum 100 results
Check the PDF
